The cookie settings on this website are adjusted to allow all cookies so that you have the very best experience. If you continue without changing your cookie settings, we'll assume that you are happy to receive all cookies on our website. However, if you would like to, you can change your settings at any time using the Change cookie settings link in the Special menu. 
    
 
Home :: Radios and Equipment

Radios and Equipment

Products

Clansman Single Transducer Headset
This Clansman Single Transducer Headset is a lightweight alternative to the normal Clansman handsets or Headset / Throat Microphones combinations. The single transducer is used both as a Microphone and a Speaker!
The Headset incorporates a sensitive microphone which should pick-up your voice while the headset is worn by the operator. The headset can also be used as a handheld microphone. The built-in Speaker and the head strap enables the radio operator to keep both hands free for other tasks while receiving.

The Headset is made from durable flexible rubber to high military specification and is splash proof. It is comfortable to wear and is fixed in position using head straps.

A Pressel switch (Push-To-Talk) is incorporated in the earpiece and is located on top of the unit. The headset can be plugged directly into the Audio or Headset sockets of any Clansman radio or harness control boxes which have a 7 Pin Clansman Audio socket.

This is an ideal headset for any Clansman Man-Pack or Back-Pack radio such as Clansman PRC-319, PRC-320, PRC-344, PRC-349, PRC-350, PRC-351, PRC-351M, PRC-352. It will also work with vehicle radio sets such as VRC-321, VRC-322, VRC-353. The headsets are supplied in excellent working condition.
£28.50 (Approximately US$ 36.48)
R-216, R-209 Head Set
Part Number ZA-28659, has 2 Pin rubber plug. Intended for use with British R-216, R-209, and other similar radios.
£25.00 (Approximately US$ 32.00)
CX-8650B Headset Connecting Cable
The following US audio accessories as well as others can be used with this coiled cable. H-161/C, H-161/D, H-161/E Headsets and MK-1039/G Headset / Microphone. Each wire ends with a U-229/U Connector to plug into the radio or VIC-1 equipment. The headset end is terminated with moulded quick release bail-out type connector.
£16.50 (Approximately US$ 21.12)
RA-440 Throat Microphone Element Single Transducer Type (Black)
The single transducer type comprises two moulded housings, which are hinged in front of the throat. The leather microphone pads align to the contours of the throat for maximum comfort in use. This assembly is attached to an elastic neck strap incorporating a safety release feature. Although twin housings are mounted on the neckband, only one is fitted with a microphone transducer, the other being a dummy unit. The transducer is a high quality moving iron magnetic type.

Specifications: Transducer type: moving iron. Sensitivity (into 150 ohms load): -51dB nominal re 1V for normal speech. Impedance: 155 ohms ?20% at 800Hz. Frequency response: rising to approx. 2.5kHz for higher intelligibility. Noise exclusion: a white noise sound field of 120dB produces an electrical output 6dB less than the speech output quoted.
£12.50 (Approximately US$ 16.00)
Throat Microphone Element Twin Transducer Type (White)
The twin transducer type incorporates two microphone housings on a flexible rubber moulded cable assembly designed to fit comfortably without undue pressure. Two microphone elements are fitted so as to provide maximum sensitivity where this is required.

Specifications: Transducer type: moving iron. Sensitivity (into 300ohms load): -50dB re 1V for nominal speech. Total impedance: 300 ohms. Frequency response: rising to approx. 2.5kHz for higher intelligibility. Noise exclusion: a white noise sound field of 120dB produces an electrical output 6dB less than the speech output quoted.
£12.50 (Approximately US$ 16.00)
H-161M Headset Microphone Cable Kit
This cable kit consists of a CX-8650 Headset connecting cable, a Throat Microphone and a key switch. The release-to-listen action key switch has three positions. Centre OFF position, a spring-loaded push-to-talk RAD position and a ICS position. Headset is not included with this kit. The following US audio accessories as well as others can be used with this cable. H-161/C, H-161/D, H-161/E Headsets and MK-1039/G Headset / Microphone.
£25.00 (Approximately US$ 32.00)
Clansman Remote 2-Wire Hand Set
The Clansman Remote Handset can be used to remotely operate the following Clansman radios, PRC-320, PRC-351/352, VRC-321/322, VRC-353, PRC-344. The remote handset can either be directly connected to the radio using a short wires or remotely connected to the radio up to 3 Km using D-10 telephone cable. It can also be connected to a Clansman vehicle control harness. Supplied in good working condition, Grade 2.
£17.50 (Approximately US$ 22.40)
Old Style Remote 2-Wire Hand Set
The old style Remote Handset can be used to remotely operate the following Clansman radios, PRC-320, PRC-351/352, VRC-321/322, VRC-353, PRC-344 as well as some older Larkspur radios. The remote handset can either be directly connected to the radio using a short wires or remotely connected to the radio up to 3 Km using D-10 telephone cable. It can also be connected to a Clansman vehicle control harness. Supplied in good working condition, Grade 2.
£28.50 (Approximately US$ 36.48)
Clansman Respirator Microphone
Gas Mask Microphone designed to be used with the Anti-Gas No. S6 Respirator.
Rocking Armature motor unit, 300 Ohm impedance at 1000Hz.
£12.50 (Approximately US$ 16.00)
M-29/U Microphone
100 Ohm carbon microphone element in a plastic case with push to talk switch and connecting cord terminating in a U-77/U connector.
£22.50 (Approximately US$ 28.80)
Clansman Amplifier AF Loudspeaker (A-AFL)
Amplifier AF loudspeaker is an audio amplifier which can be connected in to the harness ring and used to select and amplify a radio or intercom signal. It can drive up to four fixed or free standing loudspeakers and it can also be used completely separate from the harness using an independent 24-28 volt power source. Vehicle radios that are supported in a harness are VRC-321, VRC-322, VRC-353 as well as some Clansman Man-Pack radios that are installed in vehicles with a harness. NSN: 5820-99-117-6143. Supplied in untested Grade 3 condition.
£36.50 (Approximately US$ 46.72)
Clansman Speaker PM Vehicle Mounting (LSV)
The Clansman PM Vehicle Mounting Loud-Speaker LSV can be connected directly to a Clansman vehicle harness and radio installations such as VRC-321, VRC-322, VRC-353.

It also works with Clansman man-pack radios such as the PRC-319, PRC-320, PRC-344, PRC-349, PRC-350, PRC-351, PRC-351M, PRC-352 if directly connected.
Supplied in New Grade 1 condition. NSN: 5965-99-117-6263.
£37.50 (Approximately US$ 48.00)
BC-1306 & GRC-9 Antenna Base IN-127
Antenna base for mobile configuration of GRC-9 and the BC-1306 radios. Attaches to the side of the radio. For GRC-9 radios you would also need a FT-515 Side Mounted Antenna Holder.
£38.50 (Approximately US$ 49.28)
Clansman Land-Rover Wing Antenna / ATU Box
The Clansman vehicle Wing ATU/Antenna box normally mounts on the wing of a British Army Land-Rover and other fighting vehicles. ATU such as BCC-543 is fitted inside with the Antenna Mount on top. The antenna box ix intended for vehicle radio installations such as Clansman VRC-353.

The box along with antenna mount and rods can also be used with a normal broadcast car type radio / CD player or CB to keep your Land Rover looking original with-out fitting a military radio in the vehicle. NSN: 5820-99-637-0735. The box is supplied in good used condition. Antenna base and rods are available separately.
£48.50 (Approximately US$ 62.08)
Clansman ARFAT RF Antenna Tuning Box for VRC-353
RF Antenna Tuning interface box ARFAT is used with the Clansman VRC-353 vehicle radio set. The box interfaces the ARFAT control signals from the radio to the Racal VHF Automatic Antenna Tuning Unit BCC-543. Supplied in good condition.
£37.50 (Approximately US$ 48.00)
MP-65 Vehicular Mast Base
MP-65 Mast base for MS-116, MS-117, MS-118 or AB-21, AB-22, AB-23, AB-24 mast sections. Spring action with 4 * 3 diameter ceramic insulator. Antenna connection is on the bottom of mast base. Requires a 2 diameter mounting hole.
£32.50 (Approximately US$ 41.60)
Russian Radio Antenna Mast Base
Clamp on antenna mast base as used with Russian P-105D, P-108D, P-109D series of radios when mounted on a vehicle or a Ural military motorbike with side car.
£38.50 (Approximately US$ 49.28)
Clansman Elevated Wide Band VHF Antenna Kit The Pineapple Antenna
This is the Clansman Elevated Wide Band VHF Antenna Kit. Wide band antennas can work with-out an ATU Antenna Tuner Unit
£80.00 (Approximately US$ 102.40)
Clansman Base Aerial Support No. 31 MK6
Clansman Base Aerial Support No. 31 MK6 made by Racal Antennas Ltd., England. Modern type of vehicle antenna base with quick release antenna rod holder. It takes the standard Clansman vehicle antenna rods and mounts on top of the Land Rover wing antenna box. The antenna base includes the base plate spacer
£35.00 (Approximately US$ 44.80)
Clansman Base Aerial Support No. 31 MK2
Clansman Base Aerial Support No. 31 MK2 made by Racal Antennas Ltd., England. It takes the standard Clansman vehicle antenna rods and mounts on top of the Land Rover wing antenna box. The antenna base includes the base plate spacer
£32.00 (Approximately US$ 40.96)
Clansman Base Aerial Support Rubber Gasket
New Rubber gasket for the Racal antenna Bases, 5330-99-949-1082.
This grubber gasket is suitable for the Clansman Base Aerial Support No. 31 MK6 and Clansman Base Aerial Support No. 31 MK2
£7.50 (Approximately US$ 9.60)
Clansman Interconnecting Box 2-Radio (IB2)
This is the standard Clansman Interconnecting Box 2-Radio or IB2. The IB2 is the main unit in the Clansman vehicle harness. It provides the Intercom Amplifier, local/remote rebroadcast and a stabilised DC power supply for the rest of the harness and can be connected up to two Clansman radios. There is audio socket for the local operator, a remote user can also be connected into the harness to use an installed radio or to have intercommunication with the crew. Supplied in good working condition, Grade 2. NSN: 5820-99-117-6250.
£58.50 (Approximately US$ 74.88)
Clansman Interconnecting Box 3-Radio (IB3)
This is the standard Clansman Interconnecting Box 3-Radio or IB3. The IB3 is the main unit in the Clansman vehicle harness. It provides the Intercom Amplifier, local/remote rebroadcast and a stabilised DC power supply for the rest of the harness and can be connected up to three Clansman radios. There is audio socket for the local operator, a remote user can also be connected into the harness to use an installed radio or to have intercommunication with the crew. Supplied in good working condition, Grade 2. NSN:5820-99-117-6110.
£43.50 (Approximately US$ 55.68)
Clansman Interconnecting Box - Drivers Box (DB)
The Drivers Box DB is situated in the driver's compartment and provide normal Live Intercom and override facilities. Functions can be extended to the Turret by the use of a Drivers Box Set Selector DBS where a crew member in the turret can operate the system.
£28.50 (Approximately US$ 36.48)
Clansman Commanders 5-Radio Junction Box (C5RJB)
Commanders 5-Radio Junction Box is used to connect five radios in a Clansman harness system.
£24.50 (Approximately US$ 31.36)
Clansman Commanders Box Fixed (CBF)
The Commander's Box Fixed CBF is used with the Commander's Personal Unit CPU which together provide all the facilities of the CB2 Crew Box. The controls are duplicated on the CPU which is held by a webbing strap around the commander's neck. The CBF will accept an independent pressel and signals from a Central Warning Indicator.
£28.50 (Approximately US$ 36.48)
Clansman Crew Box 2-Set (CB2)
The CB2 is the standard Clansman Harness Crew Box. It gives the crew member access through the harness to either of the two radios as a working set and simultaneously to the other for monitoring purposes. Volume controls are provided for both the working set and the monitor set. Supplied in good working condition, Grade 2. NSN: 5895-99-117-4911.
£28.50 (Approximately US$ 36.48)
Clansman Warning Unit Audible
The warning unit monitors the 24 volt supply rail of a vehicle and sounds a buzzer if there is a fault present.
£19.50 (Approximately US$ 24.96)
Clansman Harness Rebroadcast Box
Provides rebroadcast facilities using two installed radios through the Clansman vehicle harness or one radio by remote line and one in Harness.
£28.50 (Approximately US$ 36.48)
Clansman Harness Interconnecting Box 12-Way-4
The Clansman Harness Interconnecting Box 12-way-4 is a junction box with Four 12 pin sockets for connection into the Clansman harness ring to provide one spur outlet to the Emergency Crew Control equipment (ECC) or to other harness boxes installed in the vehicles hull. There are no operator controls on the box. Part Number FV990560.
£18.50 (Approximately US$ 23.68)
Clansman Harness Interconnecting Box 12-Way IB12
The Clansman Harness Interconnecting Box 12-way (IB12) is a junction box with Three 12 pin sockets for connection into the harness ring to provide one spur outlet to the Emergency Crew Control equipment (ECC) and another to other boxes installed in the vehicles hull. There are no operator controls on the box. Part Number FV759770.
£18.50 (Approximately US$ 23.68)
Clansman Interconnecting Box Radio Adapter (IBRA)
The interconnecting Box Radio Adapter enables Clansman Radios to be used to their full potential in a Larkspur harness, and provides the Intercom Amplifier for the Larkspur Harness.
Clansman Adapter Unit
Converts 7 pin Clansman audio to US style audio equipment. Has 5 pin US U-229/U style Connector.
Clansman Remote Personal Unit (RPU)
The Clansman remote personal unit (RPU) is carried around the neck on the webbing strap. It gives access to the harness with intercom and radio facilities or direct in to a radio, both at distance up to 3 KM using twin cable (D10) or 5 KM using CT-10 cable.

Call is available when working harness or radio direct. It is used with ear-defending headgear and is fitted with snatch release from both headgear and neck-strap.
£16.50 (Approximately US$ 21.12)
Larkspur Morse Key
NSN 5820-99-102-5319. Can be used with Larkspur Radio Equipment. Has standard Larkspur audio connectors.
£43.50 (Approximately US$ 55.68)
Wireless Set No. 19 Key and Plug Assembly No. 9
Morse Key for use with Wireless Set Number 19, supplied in good condition complete with canvas straps.
£38.50 (Approximately US$ 49.28)
Larkspur J1 Box
The Larkspur J1 Box enables several crew members to work a radio set and have have intercom function. The J1 Box also allows the radio set to be connected to one other radio set.
Larkspur Junction Distribution Box Number 9

£115.00 (Approximately US$ 147.20)
Larkspur J2 Box
The J2 Junction Box is used for a two radio set AFV and other vehicle installations.
£38.50 (Approximately US$ 49.28)
Larkspur Control Unit C Box
The Larkspur Control Unit C box is the operator's control unit for controlling one or two radio sets in a vehicle.
Larkspur O Box
The Larkspur O Box allows 2 headsets to be connected to a radio set. A volume control is provided.
Larkspur B Box
Larkspur Rebroadcast Unit B box is part of a two radio set installation.
Larkspur Interconnecting Box 4 Way Number 4
The Larkspur Interconnection Box 4 way Number 4 was the primary LT distribution unit, used in almost all vehicle radio installations.
Larkspur I Box
The Larkspur I box provides intercom function in systems that do not have a built-in intercom amplifier already installed in the radio.
Larkspur Control Unit Number 31
Larkspur Control Unit Number 31
Larkspur Interconnecting Box 2 Way, 4 Way
Larkspur Interconnecting Box 2 Way, 4 Way
French TF.PP-1A Sound Powered Telephone
Sound powered telephone equipment provide facilities for talking and signalling with-out the use of any batteries or a power source. The telephone handset contains a sound-powered transmitter and receiver units.
£45.00 (Approximately US$ 57.60)