The cookie settings on this website are adjusted to allow all cookies so that you have the very best experience. If you continue without changing your cookie settings, we'll assume that you are happy to receive all cookies on our website. However, if you would like to, you can change your settings at any time using the Change cookie settings link in the Special menu. 
    
 
Home :: SOLD OUT ITEMS

SOLD OUT ITEMS

In this section we are going to park our sold out items, items in this section are no longer available. The listings in this section are provided for reference. These items may be reactivated once they are back in stock. Please feel free to email us.

Products

R-392 HF Receiver
The R-392/URR is the perfect HF Ham Radio receiver for everyday use. It is built to high US military specification to withstand battlefield conditions. A very sensitive HF receiver for the amateur radio enthusiasts who likes to operate the proper old fashioned way. It tunes SSB very easily and sounds great on AM!

R-392 Basic Specifications
Frequency Range: 0.5-32 MHz
Operating Voltage: 24-28 VDC
Size: (W*H*D): 283*293*365 mm
Modes of Operation: AM/CW
Current Drain: 3 Amps Max
Bandwidth: 2, 4 and 8 KHz
Impedance: 50 Ohms

The R-392/URR is the little brother of the famous Collins R-390 receiver, it is designed by Collins and built under licence by a number of manufactures including Collins Radio Company, Philco Corporation, Western Electric and Stewart Warner.The R-392/URR is essentially a R-390 that is re-packaged in a water resistant case. It is ruggerised and is made more compact than the standard R-390 for use in military vehicles and field command posts.It operates from 24-28 Volt DC @ 3 Amps. The radio is very silent in operation as it does not use any vibrators, dynamotors or other noisy voltage converters. The R-392/URR Receiver provides continuous tuning and covers 0.5-32 MHz in 32 bands. AM, CW (Voice or Tone) and SSB using BFO for product detection, Three Bandwidth settings 2, 4 and 8 KHz. Calibration points is provided every 100 kHz throughout its range. The radio can be used as a stand alone receiver or as part of a two-way radio set with a T-195 Transmitter. This configuration was called the GRC-19.

Front Panel Controls:
Function Switch (Off, Stand-By, Normal, Limiter, Net and Squelch), Mechanical Digital Tuning Dial, Carrier Level Meter, Megahertz Control, Kilohertz Control, RF Gain-Squelch Threshold Control, AF Gain Control, Antenna Trimmer Control, BFO Control, BFO Pitch Control, AGC Switch, Dial Zero Control, Dial Lock Control, Bandwidth Switch, Dial Dimmer Switch.

Front Panel Connectors:
One IF and two Audio Connectors, one BNC Antenna Connector and one push-on Antenna Connector, Power Connector (Power Pins A & D +24VDC, Pin E is Ground).

The R-392 HF Receiver is supplied tested and working with a LS-166 Loud-Speaker and a reproduction Operators Manual.
SCR-528 W.W.II Sherman Tank Radio Station
The SCR-694 radio station as used in many W.W.II US Armoured Fighting Vehicles, such as M3, M26, M5 and the famous M4 Sherman Tank.

The radio station operates from 12 Volt vehicle battery supply and includes the BC-603-D Radio Receiver 1942 dated, BC-604-D Radio Transmitter 1945 dated, CH-264 Spares Parts Box and the FT-237-C Vehicle Mount 1942 dated.

BC-603-D Radio Receiver 20-28MHz, FM, IF 2.65MHz, continuous tuning and 10 presets channels, has squelch facility with a built-in loud-speaker, uses 10 tubes.

BC-604-D Radio Transmitter 20-28MHz, FM, 20 Watts output, 10 crystal channels, uses 8 tubes.

The radio is available in good condition but untested and includes some accessories, such as spare tubes and crystals.
RA-400 Cougar Fist Microphone
The RA-400 Speaker/Microphone is made from impact resistant black plastic. The unit is water resistant with a Push to Talk Switch and Antenna socket. The Lead has Antenna plug and 7 Pin Clansman Audio Plug. The unit is designed to provide reliable two-way communications with a wide range of PMR, handheld radios and communication systems, including the Cougar secure radio system, and Clansman Radio Equipment that has a 7 pin Audio Connector. The microphone's design is optimised for hand-held operation and for minimum inconvenience to the user's clothing when in stand-by mode. The RA400 is supplied with an earphone socket, Ear Piece not Supplied enabling discrete reception of incoming signals. The case includes a spring steel clothing clip.
AT-272A Flexible Goose Neck
The AT-272A is the flexible antenna section for use with PRC-8, PRC-9 and PRC-10 and other portable radios. The goose neck is used with the AT-272A Tape antenna and can be bent to any position. Overall length 21Cm.
AT-272A Tape Antenna
The AT-272A Tape Antenna is for use with PRC-8, PRC-9, and PRC-10 and other portable radios. The antenna is very flexible and would not easily break. Total length 75.5 Cm.
AB-129 Semi-Rigid Antenna Base
The AB-129 is a semi-rigid antenna base for use with PRC-8, PRC-9 and PRC-10 and other portable radios. The antenna base is used with the AT-271A long antenna rod and can be slightly bent to any position, acting as a shock absorber for the long antenna. Overall length 19.4 Cm.
AT-271A Long Antenna Rod
The AT-271A long antenna rod is for use with PRC-8, PRC-9, and the PRC-10 and other portable radios. The antenna sections are connected together with steel wire and is made-up of seven sections totalling just over 3 meters in length. The antenna rods are to be used with AB-129 Semi-Rigid antenna base.
Clansman PRC-350 Selective Unit RF 2 Watt SURF
The Clansman Selective Unit Radio Frequency SURF 2 Watt for use with the Clansman PRC-350 VHF radio set. The SURF is used when more than one radio is used in close proximately and prevents one radio interfering with the other radio. The SURF is then tuned to give optimum performance and achieve maximum range with the radio set. NSN: 5820-99-630-6154. Supplied in good condition.
MP-50 Antenna Mount
MP-50 Antenna mounting bracket with 2 diameter mounting hole. For mounting AB-15 or MP-65 type antenna mast base to military vehicles or other flat surfaces.
£28.00 (Approximately US$ 35.84)
AM-1780/VRC Audio Amplifier for VIC-1 Vehicle Intercom System
The AM-1780 is the main junction box / audio amplifier for the AN/VIC-1 Vehicle Intercom System. It provides control of the 24 Volt DC power to the associated crewmember control boxes and to the radio system that may be connected to the amplifiers. The amplifiers also amplify and control the audio signals in the intercommunication (intercom) and radio circuits.

AN/VIC-1 Vehicle Intercom System Over-View

The AN/VIC-1 is a part of electrical harness of vehicles such as Tanks, Armoured Personnel Carriers and Self Propelled Howitzers. The AN/VIC-1 Intercommunications system provides tactical vehicle crew members with facilities for communications with radio connected to the system, as well as facilities for communicating with each other. It includes the AM-1780 and intercommunications remote control box C-2298. The number of remote control units used are dependent upon type of vehicle and its operational requirements.
  • Can support 2 Transmit / Receive radios and 2 Receive only radios.
  • Provides up to six intercom stations.
  • Push to talk can be selected for all stations or just the commanders station.
  • Each intercom station can select ALL or Radios A/B/C or intercom only operation.
  • Radio volume is reduced automatically when intercom is keyed.
  • Passive mode operation of radio's audio when the system is not powered.
  • Simplifies radio and intercom wiring.
  • Stations can use a Headset, CVC Helmet, H-180 headphones, H-250 Handset or M-80 Microphone.
  • Ruggedly constructed, water resistant and weather proof to military specification.
  • Operates from 24 Volt DC vehicle power supply.
BC-611 Power Supply Unit
Custom made specially for the BC-611 W.W.II. Radio sets. Uses 4 standard D size batteries to provide both LT, and HT supplies to the radio. No modifications is required. Power Supply and batteries fit neatly inside the BC-611.
BA-279 Dry Battery
The BA-279 is the original battery for the PRC-8, PRC-9, and the PRC-10 series of radios. The BA-279 is supplied as New-Old-Stock. They are well past sell-by date and are probably dead. The battery's case is of metal construction and for those who like to keep radio equipment original is ideal for fitting a BA-511A PSU and batteries inside the case.
RACAL UK PTC-404 Field Telephone
The Racal UK PTC-404, 2 Wire Field Telephone safely operates from 6 VDC using 4 D Cells and connects by 2 core wire. These field Phones are designed to be water and dust proof. Operational range is over 10 miles!!! (28km). 3 Modes of operation, Normal for normal speech, Whisper for when circumstances only permits whispering in to the microphone and Test to test operation and communications link. Also featured is a variable Audio and Visual Alarm facility.

A Pair or more of these Field Telephones make an ideal and easy communication link between two or more points such as house to the garden shed, or from cave to the surface.

** Field Telephones are supplied complete with Handset and Nylon Carry Bag. Supplies are limited.

For high quality telephone cable please have a look here,

800 Meters DON-10, WD1/TT, D-10 Twisted Pair Telephone Cable

The DON-10 is a two core twisted pair high temperature, fire resistant Telephone Cable with breaking resistance of up to 1/2 Tonne! These cables are used over long distances to connect together field telephones, line equipment and field telephone exchanges as well as remote handsets to Clansman radios.

ST-120A Carrying Harness
The ST-120A is the carrying harness for the PRC-8, PRC-9 and PRC-10 Radios. The carry harness allows the carrying the radio set as a back-pack radio and it is used in conjunction with the M-1945 Suspender Belt.
M-1945 Belt Suspenders
The M-1945 suspender belt is used in conjunction with the ST-120A carrying harness. It allows the transportation of a PRC-8, PRC-9 or PRC-10 radio as a back-pack.
CW-216A Antenna & Accessories Bag
The CW-216A antenna and accessories bag is used with the PRC-8, PRC-9 and PRC-10 as well as other radio sets. The bag allows the storage of the radios accessories such as antenna rods, tape antenna, goose neck and the handset. It is designed to attach to the combat belt around the waist.
BG-172 Canvas Accessories Bag for GRC-9 and BC-1306
Canvas Bag for long-wire antennas, cables, and other accessories for the GRC-9 and BC-1306 radio stations. These bags are in used condition and may have some small holes or cuts.
AN/PRC-25 Vietnam Era US Back-Pack VHF Radio
The AN/PRC-25 was the most widely used radio set in Vietnam war by the US troops. The radio is known as the Prick 25 and is very similar to the modern PRC-77 in looks and operation. The radio is a light weight Synthesised VHF man-pack, solid state with the exception of one tube. 2 Watts power output. The radio provides 920 channels in 2 VHF frequency bands 30-52.95 MHz, and 53-75.95 MHz FM, channel spacing 50 KHz. Requires 12.5-15 Volts DC @800 ma and 3 Volts DC for tube heater voltage. Frequency selection by front panel knobs, frequency display by digital mechanical read-out.

The radio is supplied in grade 2, serviced and tested condition and includes the battery box. Other accessories are not included, but maybe available seporatly, Please Ask!
DY-88 Dynamotor Power Supply
Powers BC-1306 and RT-77/GRC-9 Radios from 6 VDC @29 Amp, 12 VDC @14 Amp or 24 VDC @6.7 Amps. Outputs 580 V @100ma, 105 V @45ma, 6.3 V @2A, 1.4 V @500ma, 6.3 V @575ma. Usable with other radios sets.
Clansman PRC-344, PRC-351, PRC-352, PRC-320 Hand Generator / Charger
The Clansman Hand Generator is used with the Clansman back-pack radios such as the PRC-344, PRC-351, PRC-352, PRC-320. It clips on between the radio and the battery and by turning the hand crank it generates 24 Volt DC for charging a standard Clansman 24 Volt battery to operate the radio. An indicator lamp lights up to indicate when the hand crank is being turned at the right speed. NSN: 5820-99-114-3390. Supplied in good condition.
AM-66-A RF Power Amp
French made RF power amp for the GRC-9 radio set. 24 VDC input, Power output is about 100 Watts. Frequency Range 2-12 Mhz.
BC-1000 Man-Pack Receiver/Transmitters
These BC-1000's are from NATO surplus and are made in France under license from Motorola in USA.

40-48 MHz in forty one 200KHz steps, FM, IF 4.3 and 2.515 MHz, power output 300 mW RF, 200mW AF, transmission range up to 3 miles with the long antenna. The radio has a built-in 43 MHz crystal calibrator. Requires 4.5VDC 500 ma and 90VDC 25 ma. The radios have French markings and are dated late 40's or the early 50's.

The radio comes complete with the following accessories. CS-128 Battery Box, HS-30 Head Set, SW-141 Switch with Leather Strap, AN-130 Antenna, M-391 Pad, ST-50, ST-54 & ST-55 Straps, TM-11-242 Manual not in English.
T-195 HF Transmitter
The T-195 is ruggerised and weather proof Automatic HF Transmitter which covers the frequency range of 1.5MHz to 24.4MHz in 10 bands. The Transmitter is capable of Simplex, Duplex, or Radio Repeater operation and can transmit AM and CW (Voice or Tone) in the MF and HF range and if used with an external frequency shift keyer for RTTY operation. The T-195 was used in US Military vehicles and field command posts.
BA-511A Power Supplies for PRC-8,9, 10
Solid state French made Switch-Mode power supplies for the PRC-8,9, 10 military Manpack radios. Replacement to a BA-279 battery. Originally used 4 French PS-41 15 Volt batteries wired in series and parallel to produce 30VDC.

The PS-41 Batteries are no longer available, nonetheless the unit can be used with any other combination of batteries which produce 24-30 VDC. The unit then makes all the voltages necessary (1.5,6,67.5, 135 VDC) and plugs straight into the PRC-8,9, or 10 radio set. The actual power supply, less its surrounding metal work along with suitable batteries can comfortably fit inside the radios battery box.
BA-511A power supply can also be used with other radio sets requiring similar voltages.
DM-21 Dynamotor for BC-312 / BC-314 WWII Radio Receiver
This is the DM-21 Dynamotor for the BC-312 or BC-314 Radio Sets. Supplied in NOS New Old Stock condition. There were plenty of these radios available on the surplus market back in the 50's and a many of these radios were modified over the years to run on mains voltage with a home made power supply. A new DM-21 Dynamotor would be a perfect for restoration of a radio to original specifications. The Dynamotor produces 235VAC @0.090 A from a 14VDC @3.3A power supply. It could also be used to provide HT voltage for other radios or projects.

Specification
RPM: 5400.
Input Volts: 14 VDC @3.3 Amp.
Output Volts: 235 Volts @0.090 Amps.
R-390 Radio Receiver
0.5-32 Mhz, thirty-two 1Mhz bands, mechanical digital dial, PTO, AM/CW, bandwidths: 0.1/1/2/4/8/16 kHz (0.1&1 xtal, others mech), 7&9 pin tubes, dual audio chains, single RF stage, 125 ohm balanced antenna input with twin axial or unbalanced with C connector, rack mount 10.5 high.
BC-1306 SCR 694 W.W.II Jeep Installation
This bundle is for the basic Jeep installation. The basic Jeep bundle includes the following Items, additional items for the jeep installation such as mounting plates, speaker can be selected from the list below.

1) BC-1306 Radio Receiver / Transmitter.
2) DY-88 Dynamotor Power Supply with input cable.
3) HS-30 Head Set.
4) T-17 Microphone.
5) CD-1086 Power Cable 2.14 Meters.
FT-482 Small Mount
FT-482 Small Mount for vehicle mounting of the BC-1306 radio set.

You would also neet the FM-85 Big mount for vehicle installation.
CD-1086 Power Cable
This is the power cable for connecting the BC-1306 or the GRC-9 Radio Sets to the DY-88 or PE-237 Power Supply. CD-1086 Power Cable is available for Jeep / Manpack installations 2.2 Meters or slightly longer and 1.2 meter for stand alone station configuration.
BC-1306 SCR 694 Man-Pack - Field Station
This bundle is for the basic Man-Pack / Field installation. The basic bundle includes the following Items, additional items for the installation such as, speaker can be selected from the list below.

1) BC-1306 Radio Receiver / Transmitter.
2) GN-58 Hand Generator with Seat & Legs.
3) HS-30 Head Set.
4) T-17 Microphone.
5) CD-1086 Power Cable 2.14 Meters.
BC-1306 SCR 694 Stand Alone Station
This bundle is for the basic Man-Pack / Field installation. The basic bundle includes the following Items, additional items for the installation such as, speaker can be selected from the list below.

1) BC-1306 Radio Receiver / Transmitter.
2) DY-88 Dynamotor Power Supply with input cable.
3) HS-30 Head Set.
4) T-17 Microphone.
5) CD-1086 Power Cable 1.2 Meters.
BC-1306 HF Radio Trasmitter - Receiver
Radio Set SCR-694 is a HF two-way radio Receiver / Transmitter and radio telegraph unit which can provide communication between moving or stationary vehicles, or as a portable field radio set. The radio set can provide communication for up to 15 miles on voice (AM) and 30 miles on (CW) between moving vehicles, and a much longer range if used in stationary position with a long antenna. Frequency range is 3,800 kHz - 6,500 Khz. Uses tubes and works from 6, 12 or 24 Volts DC.
PRC-10 Receiver/Transmitter
Radio set AN/PRC-10, frequency range 38.0 to 54.9 MHz, Super-Heterodyne FM Receiver / Transmitter. Man-Pack or Vehicular fixed station operation.1 Watt transmitter Output. Uses 16 miniature wire ended tubes. Power requirements 1.5V, 6V, 67.5V, 135V powered by BA-279 battery.

The AN/PRC-10 is part of a family of radios AN/PRC-8, AN/PRC-9, and AN/PRC-10 which were used as a squad radio by US Army in Korea and Vietnam Wars and by many NATO countries. Made in USA in 1950's and 60's, each radio had a different frequency range.

AN/PRC-8 >>>> 20.0 to 27.9 MHz
AN/PRC-9 >>>> 27.0 to 38.9 MHz
AN/PRC-10 >>>> 38.0 to 54.9 MHz

The PRC-10 is supplied in good working condition Grade 2 with the Battery Box, but no other accessories. H-33/PT Handset is available separately.
VIC-1 Vehicle Intercom system Basic Kit
The VIC-1 basic kit includes one AM-1780 Junction box / audio amplifier and two C-2298 Control Boxes.

AM-1780/VRC Audio Amplifier Is the main junction box for the AN/VIC-1 Vehicle Intercom System. It provides control of the 24 Volt DC power to the associated crewmember control boxes and to the radio system that may be connected to the amplifiers. The amplifiers also amplify and control the audio signals in the intercommunication (intercom) and radio circuits.

C-2289 Control Box The standard Crewmember Control Box, The C-2298/VRC allows vehicle crewmembers to select, by means of the MONITOR switch and the audio accessory controls, to communicate with other crewmembers via the intercom circuit, or remotely operate or monitor any radio equipment connected to the AM-1780/VRC.

AN/VIC-1 Vehicle Intercom System Over-View
The AN/VIC-1 is a part of electrical harness of vehicles such as Tanks, Armoured Personnel Carriers and Self Propelled Howitzers. The AN/VIC-1 Intercommunications system provides tactical vehicle crew members with facilities for communications with radio connected to the system, as well as facilities for communicating with each other. It includes the AM-1780 and intercommunications remote control box C-2298. The number of remote control units used are dependent upon type of vehicle and its operational requirements.
  • Can support 2 Transmit / Receive radios and 2 Receive only radios.
  • Provides up to six intercom stations.
  • Push to talk can be selected for all stations or just the commanders station.
  • Each intercom station can select ALL or Radios A/B/C or intercom only operation.
  • Radio volume is reduced automatically when intercom is keyed.
  • Passive mode operation of radio's audio when the system is not powered.
  • Simplifies radio and intercom wiring.
  • Stations can use a Headset, CVC Helmet, H-180 headphones, H-250 Handset or M-80 Microphone.
  • Ruggedly constructed, water resistant and weather proof to military specification.
  • Operates from 24 Volt DC vehicle power supply.
RT-196 PRC-6 Receiver - Transmitter
A new batch of early PRC-6 hand held radios as used in the Korean, and Vietnam wars. 47-55.4 MHz, Crystal Control, 200 mw Output, 13 tubes,1.5,45, and 90V DC. ( Supplied Complete, Grade 3 Untested Repairable ).
PRC6-6 German Six Channel Receiver - Transmitter
Six channel German Army version of American PRC-6 radio. The PRC-6/6 is a portable VHF radio with a operational Frequency of 47-55.4 MHz, FM, 250 mw Output, uses miniature tubes, crystal controlled, requires 1.5,45, and 90VDC to operate. Supplied complete in good working order with Canvas Strap, Tape Antenna and one crystal.
German FSE-38/58 VHF FM Portable Transceiver
The German FSE-38/58 is a VHF FM Portable Transceiver with a frequency range of 38-58 MHz. Includes audio squelch facility. Output Power 10 and 50 mW. Powered by a 6 Volt Rechargeable Battery ( Not Supplied ) or a external 24 Volt PSU. Plug-in Crystal Frequency Selection. FSE-38/58 is modular constructed on a die-cast aluminium chassis. The water proof outer case is made from impact resistant plastic, with a aluminium front panel. Up to nine spare crystals can be stored on a holder inside the case. Uses a H-33/PT Hand Set. The radio can easy be modified for 650 mW Output.
GRC-106 400W SSB Synthesized HF Transmitter - Receiver
The GRC-106 is a Fully Synthesized 400 Watt HF SSB mobile vehicular Receiver ? Transmitter Radio Station operating on CW and USB, 28 000 selectively tuned channels spaced in 1 KHz increments in the 2 to 29.999 MHz providing full coverage from 2 to 30Mhz frequency range. It is beautifully constructed radio station with no expense spared in its construction and makes an ideal rig for ham radio work or installing in a military vehicle such as a M151 Jeep.
WRT-2 500 Watt US Navy Ship Transmitter
Here is a transmitter for a serious radio ham or collector / restorer who likes a challenge and wants a piece of US naval history. Perhaps you are restoring a radio room in a ship and need some units or the complete transmitter.

These transmitters were made by Cosmos Industries and some of them are from the famous USS Gurke D-783 which was a DD type destroyer before it was finally sunk in 1977 in naval exercises. See http://www.ussgurke.org/history.htm

Only a few hundred WRT-2's were ever manufactured by a few manufacturers for the US Navy and very few remain in existence in private collections and ship museums today, most were sunk in naval exercises or destroyed.
German SEM-52S Synthesised VHF Transceiver
The SEM-52S radio is the modern synthesised version of the SEM-52A radio set. It was until now a hard to find item and it is still used even today by the German Army. The SEM-52S is a portable handheld synthesised VHF radio transceiver which operates 46.000-57.975 MHz. 6 channels can be programmed internally by rotary switches from 400 possible channels in 25 KHz steps.

A speaker / Microphone are now built in to the radio as well as the PTT switch. Noise-operated squelch is provided for quiet operation and the radio is also DATA capable. External Audio accessories such as Handset or Headsets can still be plugged in to the radio. Power Output 1 Watt and operates from 12 Volts DC using 8 standard AA 1.5 Volt batteries.

The radio is normally worn on the left chest using the carrying harness and is very easy to operate in that position with the flexible Tape Antenna extending over your left shoulder. The antenna socket is very cleaver in design as it allows a normal BNC plug to be used or the Tape Antenna to be plugged in.

The SEM-52S is supplied in excellent working condition Grade-2 and comes pre-programmed with the following accessories, Battery Box, AA Battery Holder, Carrying Harness, Strap and the Flexible Tape Antenna.

Please Note: The girl in the picture is not included with the radio deal!! :-)

Specifications of the SEM-52S
Frequency Range: 46.000 to 57.975 MHz.
Number of Possible Channels: 400 channels
Selectable Channels: 6 Selectable Channels
Channel Spacing: 25 KHz
Output power: 1 Watt
Sensitivity: better 0,5 Micro Volt @ 20 dB S/N
Modulation mode: F3 (FM modulation)
Power Supply: 12 Volts using 8 standard 1.5 Volt AA batteries
Power consumption: receiving 70 mA, transmitting 400 mA
Provisions for data transmission and low level audio
Built in Microphone / Speaker
Dimensions: 95mm x 219mm x 39mm
Weight: 1.3 kg

Order Two Radios at the same time and save
PRC-9 Receiver/Transmitter
Radio set AN/PRC-9, frequency range 27.0 to 38.9 MHz, Super-Heterodyne FM Receiver / Transmitter. Man-Pack or Vehicular fixed station operation.1 Watt transmitter Output. Uses 16 miniature wire ended tubes. Power requirements 1.5V, 6V, 67.5V, 135V powered by BA-279 battery.

The AN/PRC-9 is part of a family of radios AN/PRC-8, AN/PRC-9, and AN/PRC-10 which were used as a squad radio by US Army in Korea and Vietnam Wars and by many NATO countries. Made in USA in 1950's and 60's, each radio had a different frequency range.

AN/PRC-8 >>>> 20.0 to 27.9 MHz
AN/PRC-9 >>>> 27.0 to 38.9 MHz
AN/PRC-10 >>>> 38.0 to 54.9 MHz

These PRC-9's are supplied in good complete untested condition Grade 3 with a Battery Box which may be slightly corroded. No other accessories is supplied with the radio set. The H-33/PT Handset, antenna rod may be available separately.
VRC-9 Vehicle Radio Set RT-67 & PP-112
The VRC-9 Tactical Vehicle Radio station is a Transmitter / Receiver which operates in the frequency range of 27-39 Mhz FM. They were mounted in Jeeps M-38A1 as well as other vehicles. 1960's dated used by US Army and some NATO countries.

Receiver-Transmitter, Frequency Range 28-39 MHz, continuous tuning or presets, FM, 2 or 15 Watt Output, uses 27 tubes, operates from 24VDC PP-112, Power supply, Tube line-up: 4 * 1U4,2.00E+24, 2 * 1A3, 2 * 1L4, 4 * 1R5, 1S5, 4 * 3Q4, 3A4, 3 * 3A5, 2 * 3B4 and 6AK5.

The station on offer is tested and operational Grade 2 and includes the following units listed below. Accessories such as LS-166 Speaker, H-33/PT handset or Antenna equipment is not included but is available separately.

RT-67/GRC Radio Transmitter / Receiver
CX-1211/GRC Interconnecting Cable
PP-112/GRC 24 Volt Power Supply
MT-299/GRC Vehicle Mounting Plate with power input cable
Clansman PRC-319 SAS Special Forces HF/VHF Man-Pack Radio
The Clansman PRC-319 is a real Spy Radio as used by the British Special Forces (SAS) in England as well as USA, Australia, and New Zealand. There were only 350 units manufactured for use in England by MEL.

The PRC-319 is a 50 Watt modern microprocessor based radio transceiver that transmits in both the HF and VHF bands, up to Aircraft frequencies for ground to air communications. Frequency range is 1.5 to 40 MHz with LCD frequency readout. The Electronic Message Unit EMU is a small alphanumeric keyboard that allows transmission of written words when voice transmissions would be dangerous, as well as data, coordinates, and direct communication with fire control and direction computers. The PRC-319 is also a burst transmitter which can store messages for up to 500 hours before automatically transmitting it at a high data rate. The radio can be operated by remote control from up to 50 meters away. The burst transmission feature allows considerable security over conventional radios. Transmitting range is 20Km with short antenna and up to 5000Km with a whip antenna. The radio operates from a 24VDC standard Clansman battery.The equipment and accessories are supplied in very good condition, tested and operational.
UK-AC1-2870 14/28 Volt AC Adaptor
The UK-AC1-2870 AC Adaptor operates from 110-240 VAC and provides 14 or 28 Volt DC via a user selectable toggle switch with LED indication. Made in England by WIDNEY AISH LTD. This AC adapter was designed to be used with Clansman range of radios and equipment that require 14 or 28 VDC to operate and can be used with other radios and equipment that require 14 or 28 Volt DC. Internally it has two switch mode power supplies that are made by WEIR type SHS100/15 A30.

Supplied in good tested condition and includes the power input cable.
Clansman Light-Weight Carry Frame / Back-Pack for PRC-320,344,351, 352
The light weight carry frame is used to carry a Clansman PRC-320, PRC-344 or PRC-351, PRC-352 and other Clansman back-pack radios. Supplied in good condition.
Clansman PRC-344 Flexible 10 Inch Battle Antenna
Clansman PRC-344 Flexible 10 Inch Battle Antenna. Resembles measuring tape. Plugs in to the antenna socket of the radio and extends upwards. NSN: 5820-99-620-9814. Supplied in very good condition.
Clansman PRC-319 Dipole Balun
This is a Clansman PRC-319 Dipole Balun. A Balun is a device that interfaces or matches the balanced antenna input of a radio to an unbalanced antenna load and is mainly connected to HF man-pack radios connected to a dipole wire antenna. The word Balun is derived from the words of BALanced to UNbalanced. A common example of where a Balun would be needed is at the feed point of a dipole antenna when a coaxial antenna wire from a radio is used. If a Balun is not used then the radios performance would be affected. NSN: 5820-99-734-7838. Supplied in good condition.
The Clansman PRC-319 Electronic Message Unit EMU BA-1304
The Clansman PRC-319 Electronic Message Unit EMU BA-1304 is a removable pocket sized small alphanumeric keyboard that allows transmission of written words and data when voice transmissions would be dangerous, to coordinates and direct communication with fire control and direction computers. The unit operates using the RWOP system. It uses standard frequency shift keying (FSK) with 850 Hz shift and forward error correction (FEC) to protect against reception errors. The bandwidth is dependent on keying speed. Supplied in good condition.
Clansman PRC-319 Antenna Tuner Unit RF BA1303 TURF
This is the Clansman PRC-319 Antenna Tuner Unit RF TURF. Manufactured by MEL Type No. BA1303. It is used to match the transmitting frequency of the PRC-319 to the antenna to give optimum performance and achieve maximum range with the radio set. To tune the antenna it digitally talks to the radio through the antenna feeder cable. NSN: 5820-99-734-7836. Supplied in good condition.
Clansman PRC-319 Antenna Tuner Unit RF Extender BA1305 TURF Extender
This is the Clansman PRC-319 Antenna Tuner Unit RF TURF. Extender Manufactured by MEL Type No. BA1305. It is used to extend the tuning range of the PRC-319 TURF and match the transmitting frequency of the PRC-319 to the antenna to give optimum performance and achieve maximum range with the radio set. To tune the antenna it digitally talks to the radio through the 7 pin connector to the TURF. NSN: 5820-99-734-7837. Supplied in good condition.