The cookie settings on this website are adjusted to allow all cookies so that you have the very best experience. If you continue without changing your cookie settings, we'll assume that you are happy to receive all cookies on our website. However, if you would like to, you can change your settings at any time using the Change cookie settings link in the Special menu. 
    
 
Home :: Products Map

Products Map

A B C D E F G H I J K L M N O P R S T U V W #


C-11329 [CD-ROM Manual Bundle]
Operation And Maintenance Instructions With Illustrated Parts Breakdown (Organizational/Intermediate) Remote Control Unit, C-11329/URC

Army Code: ########
Navy Code: ########
Air-Force Code: TO-31R2-2URC-91
Manual Date: 23 July 1985
Country: USA
Manual Language: English
--------------------------------------------------------------
Maintenance Instructions With Illustrated Parts Breakdown (Depot) Remote Control Unit C-11329/URC

Army Code: ########
Navy Code: ########
Air-Force Code: TO-31R2-2URC-93
Manual Date: 15 January 1986
Country: USA
Manual Language: English
--------------------------------------------------------------
£15.00 (Approximately US$ 19.20)
C-2289 Control Box for VIC-1 Vehicle Intercom System
The C-2298 is the standard Crewmember Control Box in a VIC-1 Intercom system. The C-2298/VRC allows vehicle crewmembers to select, by means of the MONITOR switch and the audio accessory controls, to communicate with other crewmembers via the intercom circuit, or remotely operate or monitor any radio equipment connected to the AM-1780/VRC.

When connected to a special port on the AM-1780/VRC, the standard control box becomes a Commander's Control Box, allowing the vehicle commander to control and/or override crewmember functions of the intercom and radio equipment.

AN/VIC-1 Vehicle Intercom System Over-View
The AN/VIC-1 is a part of electrical harness of vehicles such as Tanks, Armoured Personnel Carriers and Self Propelled Howitzers. The AN/VIC-1 Intercommunications system provides tactical vehicle crew members with facilities for communications with radio connected to the system, as well as facilities for communicating with each other. It includes the AM-1780 and intercommunications remote control box C-2298. The number of remote control units used are dependent upon type of vehicle and its operational requirements.
  • Can support 2 Transmit / Receive radios and 2 Receive only radios.
  • Provides up to six intercom stations.
  • Push to talk can be selected for all stations or just the commanders station.
  • Each intercom station can select ALL or Radios A/B/C or intercom only operation.
  • Radio volume is reduced automatically when intercom is keyed.
  • Passive mode operation of radio's audio when the system is not powered.
  • Simplifies radio and intercom wiring.
  • Stations can use a Headset, CVC Helmet, H-180 headphones, H-250 Handset or M-80 Microphone.
  • Ruggedly constructed, water resistant and weather proof to military specification.
  • Operates from 24 Volt DC vehicle power supply.
CD-1086 Power Cable
This is the power cable for connecting the BC-1306 or the GRC-9 Radio Sets to the DY-88 or PE-237 Power Supply. CD-1086 Power Cable is available for Jeep / Manpack installations 2.2 Meters or slightly longer and 1.2 meter for stand alone station configuration.
CD-307 Cord For HS-30 Headset
The CD-307 cord is used with the HS-30 Headset, total length is about 170 cm and had a PL-55 plug to connect to radio and a JK-26 socket for HS-30 headset. Used with old war time radios such as BC-1306, BC-1000 and GRC-9 Radio sets. The CD-307 lead is supplied in very good condition.
£10.00 (Approximately US$ 12.80)
Centre Junction Dipole Balun
This is a Clansman Centre Junction Dipole Balun. A Balun is a device that interfaces or matches the balanced antenna input of a radio to an unbalanced antenna load and is mainly connected to HF man-pack radios connected to a dipole wire antenna. The word Balun is derived from the words of BALanced to UNbalanced. A common example of where a Balun would be needed is at the feed point of a dipole antenna when a coaxial antenna wire from a radio is used. If a Balun is not used then the radios performance would be affected. NSN: 5985-99-620-9535. Supplied in good condition.
£32.50 (Approximately US$ 41.60)
Clansman 1.2 Meter MK6 Whip Antenna for PRC-350, PRC-351, PRC-352
Clansman 1.2 Meter MK6 Whip Antenna for PRC-350, PRC-351, PRC-352 Man-Pack radios. There are 4 sections to this antenna, when erected the total length is 120 Cm (47 inch). The antenna plugs in to the antenna socket of the radio. Supplied in very good condition. NSN: 5985-99-661-6201.
£15.50 (Approximately US$ 19.84)
Clansman 2.5 Meter Whip Antenna for PRC-319, PRC-320
Clansman 2.5 Meter Whip Antenna for PRC-319, PRC-320 Man-Pack radios. There are 8 sections to this antenna, when erected the total length is 250 Cm (98.5 inch). The antenna plugs in to the springy whip adapter of the PRC-320 and in to a special antenna holder of a PRC-319. Supplied in very good condition. NSN: 5820-99-661-6859.
£14.50 (Approximately US$ 18.56)
Clansman 24 Volt 1Ah Slim Rechargeable Alkaline Battery Pack
This is the Clansman Slim-Line 24 Volt Rechargeable Alkaline Battery Pack, capacity 1Ah. The battery is used with many Clansman Man-Pack radios such as PRC-320, PRC-344, PRC-351, PRC-352.

The battery can be re-charged by using a Clansman Hand Generator or with one of the following Clansman battery chargers:

Charger Battery, DCCU 28 Volt, NSN: 6130-99-117-0450
Charger Battery, DCCU 14 Volt, NSN: 6130-99-620-2114
Charger Battery, ACCU, NSN: 6130-99-117-0451

The metal battery pack is supplied in used condition and may not last for long. However as they are metal construction with the top riveted on they can be taken apart for cell replacement.

See this excellent article on Refurbishing a Clansman Battery on VMARS website.
£15.00 (Approximately US$ 19.20)
Clansman 24 Volt 4Ah Rechargeable Alkaline Battery Pack
This is the Clansman 24 Volt Rechargeable Alkaline Battery Pack, capacity 4Ah. The battery is used with many Clansman Man-Pack radios such as PRC-320, PRC-344, PRC-351, PRC-352.

The battery can be re-charged by using a Clansman Hand Generator or with one of the following Clansman battery chargers:

Charger Battery, DCCU 28 Volt, NSN: 6130-99-117-0450
Charger Battery, DCCU 14 Volt, NSN: 6130-99-620-2114
Charger Battery, ACCU, NSN: 6130-99-117-0451

The metal battery pack is supplied in used condition and may not last for long. However as they are metal construction with the top riveted on they can be taken apart for cell replacement.

See this excellent article on Refurbishing a Clansman Battery on VMARS website.
£22.50 (Approximately US$ 28.80)
Clansman 24 Volt 5Ah Rechargeable Nickel Cadmium Battery Pack
This is the Clansman 24 Volt Rechargeable Nickel Cadmium Battery Pack, capacity 5Ah. The battery is used with many Clansman Man-Pack radios such as PRC-320, PRC-344, PRC-351, PRC-352.

The battery can be re-charged by using a Clansman Hand Generator or with one of the following Clansman battery chargers:

Charger Battery, DCCU 28 Volt, NSN: 6130-99-117-0450
Charger Battery, DCCU 14 Volt, NSN: 6130-99-620-2114
Charger Battery, ACCU, NSN: 6130-99-117-0451

The metal battery pack is supplied in used condition and may not last for long. However as they are metal construction with the top riveted on they can be taken apart for cell replacement.

See this excellent article on Refurbishing a Clansman Battery on VMARS website.
£25.00 (Approximately US$ 32.00)
Clansman 24 Volt Battery Extension Cable
Extension Cable for Clansman 24 volt back-pack batteries. One end of the cable screws on top of the radios battery terminal and the other end screws on top of the battery's output terminal and allows the radio to be operated away from the battery.

This cable can also be modified by cutting the battery end off and connecting it to a stabilised 24 Volt DC power supply to operate the radio with-out a battery. Works with the following Clansman back-pack radios, PRC-320, PRC-344, PRC-351 and PRC-352. Supplied in very good condition.
Clansman 3 Way Power Distribution Box
This is the Clansman 3 way power distribution box. It connects to 12-14 or 24-28 Volt DC power supply of a vehicle or power supply using the bolt on fly leads and provides 3 fuse protected 2 pin power outlets to connect to Clansman equipment such as VRC-353 or VRC-321 radio stations. Supplied in very good condition.
£23.50 (Approximately US$ 30.08)
Clansman 5.4 Meter Antenna Mast Kit
This is the Clansman 5.4 Meter antenna mast kit. There are 6 lightweight strong hollow fibreglass tubes that push fit in to one another for a total height of 5.4 meters. The mast requires a ground area of approximately 6 meters for the erection of the mast and tie down ropes. The Clansman Elevated Ground Spike Antenna EGSA fits on top of this mast kit and is used with Clansman VHF as well as HF radios. The kit is supplied in good condition with accessories.
£58.50 (Approximately US$ 74.88)
Clansman Amplifier AF Loudspeaker (A-AFL)
Amplifier AF loudspeaker is an audio amplifier which can be connected in to the harness ring and used to select and amplify a radio or intercom signal. It can drive up to four fixed or free standing loudspeakers and it can also be used completely separate from the harness using an independent 24-28 volt power source. Vehicle radios that are supported in a harness are VRC-321, VRC-322, VRC-353 as well as some Clansman Man-Pack radios that are installed in vehicles with a harness. NSN: 5820-99-117-6143.
£36.50 (Approximately US$ 46.72)
Clansman Amplifier Intercommunications Box (AIB)
Normally used on the rear exterior of a Self Propelled Artillery Vehicle, the Clansman Amplifier Intercommunications Box (AIB) provides cordless intercommunications between the interior of vehicle and ammunition numbers outside the vehicle.

It is switched on at the Radio Lines Box (RLB) and allows ammunition numbers to monitor the harness intercommunications channel or to be addressed by the commander. The unit has a Press-To-Talk button to permit ammunition numbers to reply by connecting the loud-speaker in to the harness circuit as a microphone!

An internal microphone amplifier inside the AIB raises the output level of the loud-speaker to a level compatible with the other crew box outputs. Volume control of the loudspeaker is controlled by the volume knob on the AIB.

A standard 7-pin Clansman Headset or Handset can be externally connected to the AIB using the socket provided. NSN: 5820-99-633-6562.
£32.50 (Approximately US$ 41.60)
Clansman Antenna Wire Element Metal Spool
Designed to be slung over a tree or similar objects for a quick basic antenna for a radio set. Wire is wound on a Metal Spool with pull out handle and wire guide. Made for Clansman radio equipment. NSN: 5820-99-620-7373. Available in good used condition.
£25.00 (Approximately US$ 32.00)
Clansman ARFAT RF Antenna Tuning Box for VRC-353
RF Antenna Tuning interface box ARFAT is used with the Clansman VRC-353 vehicle radio set. The box interfaces the ARFAT control signals from the radio to the Racal VHF Automatic Antenna Tuning Unit BCC-543. Supplied in good condition.
£37.50 (Approximately US$ 48.00)
Clansman Base Aerial Support No. 31 MK2
Clansman Base Aerial Support No. 31 MK2 made by Racal Antennas Ltd., England. It takes the standard Clansman vehicle antenna rods and mounts on top of the Land Rover wing antenna box. The antenna base includes the base plate spacer
£25.00 (Approximately US$ 32.00)
Clansman Base Aerial Support No. 31 MK6
Clansman Base Aerial Support No. 31 MK6 made by Racal Antennas Ltd., England. Modern type of vehicle antenna base with quick release antenna rod holder. It takes the standard Clansman vehicle antenna rods and mounts on top of the Land Rover wing antenna box. The antenna base includes the base plate spacer
£35.00 (Approximately US$ 44.80)
Clansman Battery Charger 14 Volt DCCU
Clansman Fast Battery Charger D.C. 14 Volt, NSN 6130-99-620-2114. Charges 24 volt batteries from 14 Volt DC input. Features include a shorter charging time, automatic termination of charging when the batteries are fully charged and a fully charged battery indicator. Can charge 1-3.3 Ah 24 Volt Batteries. Supplied in good tested condition, input and output cables are not included, but are available separately, See options below.
£38.50 (Approximately US$ 49.28)
Clansman Battery Charger 28 Volt DCCU
Clansman Fast Battery Charger D.C. 14V, NSN 6130-99-117-0450. Charges 24 volt batteries from 28 Volt DC input. Features include a shorter charging time, automatic termination of charging when the batteries are fully charged and a fully charged battery indicator. Can charge 1-3.3 Ah 24 Volt Batteries.
Supplied in good tested condition, input and output cables are not included, but are available separately, See options below.
£38.50 (Approximately US$ 49.28)
Clansman Commanders 5-Radio Junction Box (C5RJB)
Commanders 5-Radio Junction Box is used to connect five radios in a Clansman harness system.
£24.50 (Approximately US$ 31.36)
Clansman Commanders Box Fixed (CBF)
The Commander's Box Fixed CBF is used with the Commander's Personal Unit CPU which together provide all the facilities of the CB2 Crew Box. The controls are duplicated on the CPU which is held by a webbing strap around the commander's neck. The CBF will accept an independent pressel and signals from a Central Warning Indicator.
£28.50 (Approximately US$ 36.48)
Clansman Commanders Box Fixed (CBF) Digital
This is the Digital version of the Commander's Box Fixed CBF. It is used with the Commander's Personal Unit CPU which together provide all the facilities of the CB2 Crew Box. The controls are duplicated on the CPU which is held by a webbing strap around the commander's neck. The CBF will accept an independent pressel and signals from a Central Warning Indicator. NSN: 5820-99-661-4263.
£32.50 (Approximately US$ 41.60)
Clansman Commanders Personal Unit (CPU)
The Clansman Commanders Personal Unit (CPU) which is held by a webbing strap around around the commanders neck. It gives access to the harness with intercom and radio facilities or direct in to a radio. Call is available when working harness or radio direct. It is used with ear-defending headgear and is fitted with snatch release from both headgear and neck-strap. NSN: 5820-99-117-5043. Supplied in good condition.
£18.50 (Approximately US$ 23.68)
Clansman Crew Box 2-Set (CB2)
The CB2 is the standard Clansman Harness Crew Box. It gives the crew member access through the harness to either of the two radios as a working set and simultaneously to the other for monitoring purposes. Volume controls are provided for both the working set and the monitor set. Supplied in good working condition, Grade 2. NSN: 5895-99-117-4911.
£28.50 (Approximately US$ 36.48)
Clansman Crew Box 2-Set (CB2) ANR Version
This is the Clansman Gold Top ANR Active Noise Reduction version of the Crew Box 2 Set. The CB2 is the standard Clansman Harness Crew Box. It gives the crew member access through the harness to either of the two radios as a working set and simultaneously to the other for monitoring purposes. Volume controls are provided for both the working set and the monitor set. Supplied in good working condition, Grade 2. NSN: 5895-99-477-3716.
£33.50 (Approximately US$ 42.88)
Clansman Crew Box 3-Set (CB3)
The Clansman Crew Box 3 Set CB3 is the standard Clansman Harness Crew Box. It gives the crew member access through the harness to either of the three radios as a working set and simultaneously to the other for monitoring purposes. Volume controls are provided for both the working set and the monitor set. Supplied in good working condition, Grade 2. NSN: 5895-99-117-4910.
£33.50 (Approximately US$ 42.88)
Clansman Crew Box 3-Set (CB3) ANR Version
This is the Clansman Gold Top ANR Active Noise Reduction version of the Crew Box 2 Set. The CB3 is the standard Clansman Harness Crew Box. It gives the crew member access through the harness to either of the three radios as a working set and simultaneously to the other for monitoring purposes. Volume controls are provided for both the working set and the monitor set. Supplied in good working condition, Grade 2. NSN: 5895-99-234-2743.
£38.50 (Approximately US$ 49.28)
Clansman Elevated Wide Band VHF Antenna Kit The Pineapple Antenna
This is the Clansman Elevated Wide Band VHF Antenna Kit. Wide band antennas can work with-out an ATU Antenna Tuner Unit
£80.00 (Approximately US$ 102.40)
Clansman Flexible Antenna for PRC-349
Clansman Flexible Antenna for PRC-349 Man-Pack radios. Total length is 26 Cm (10.23 inch). The antenna screws in to the antenna socket of the radio. NSN: 5985-99-732-6041.
£13.50 (Approximately US$ 17.28)
Clansman Flexible Antenna for PRC-350, PRC-351, PRC-352
Clansman Flexible Antenna for PRC-350, PRC-351, PRC-352 Man-Pack radios. Total length is 26 Cm (10.23 inch). The antenna plugs in to the antenna socket of the radio. Supplied in very good condition. NSN: 5985-99-661-6417.
£10.00 (Approximately US$ 12.80)
Clansman GS Back-Pack / Vehicle Fixing Frame for PRC-320,344,351, 352 Radios
The standard GS carry frame is used to carry a Clansman PRC-320, PRC-344 or PRC-351, PRC-352 and other Clansman back-pack radios. Can also be fixed into a vehicle using a GS fitting frame. Supplied in good condition.
£35.00 (Approximately US$ 44.80)
Clansman Harness Interconnecting Box 12-Way IB12
The Clansman Harness Interconnecting Box 12-way (IB12) is a junction box with Three 12 pin sockets for connection into the harness ring to provide one spur outlet to the Emergency Crew Control equipment (ECC) and another to other boxes installed in the vehicles hull. There are no operator controls on the box. Part Number FV759770.
£18.50 (Approximately US$ 23.68)
Clansman Harness Interconnecting Box 12-Way-4
The Clansman Harness Interconnecting Box 12-way-4 is a junction box with Four 12 pin sockets for connection into the Clansman harness ring to provide one spur outlet to the Emergency Crew Control equipment (ECC) or to other harness boxes installed in the vehicles hull. There are no operator controls on the box. Part Number FV990560.
£18.50 (Approximately US$ 23.68)
Clansman Harness Rebroadcast Box
Provides rebroadcast facilities using two installed radios through the Clansman vehicle harness or one radio by remote line and one in Harness.
£28.50 (Approximately US$ 36.48)
Clansman HF 250 Watt Antenna Tuner Unit TURF
This is the Clansman 250 Watt HF Antenna Tuner TURF for use with the Clansman 250 Watt RF Power Amplifier. The TURF and the 250 Watt RF Amplifiers were designed to upgrade the standard VRC-321 to a VRC-322. The TURF is used to match the antennas length to the transmitting frequency of the radio for optimum performance and achieve maximum range. It can also be used with other HF radios having an output power of up to 250 Watts.

The TURF has been designed and developed by MEL Communications Ltd in Crawley, England for mobile or static use. It is primarily designed as an High Power HF vehicle station for mobile ground-wave operation, but can also be used as a ground station or for sky-wave operation over long distances.

Frequency range 1.5 to 30 MHz. Power handling up to 300 Watt PEP (SSB) and 250 Watt CW. Beta light illumination is provided to enable the meter and Setting Switches to be read in the dark.

The controls and front-panel has been designed to permit straightforward unambiguous operation without the need for extensive operator training. Protection circuits prevent damage from various hazards including local high power transmissions.

The TURF is available in good working condition. 250 Watt RF Amplifier and other accessories such as Harness Boxes, Hand-Set, Head-Sets as well as Vehicle Mounting Trays for the radio and TURF are available separately on this website.Click here for a list of Accessories.
Clansman HF 250 Watt RF Power Amplifier
The British Army Clansman HF 250 Watt RF Power Amplifier. These amplifiers were designed to upgrade the standard VRC-321 to a VRC-322. The amplifier boosts the output power of the Clansman VRC-321 vehicle radio station to 250 Watts. It can also be used with other HF radios having an output power of 20-40 Watts.

The RF amplifier has been designed and developed by MEL Communications Ltd in Crawley, England for mobile or static use. It is primarily designed as an High Power HF vehicle station for mobile ground-wave operation, but can also be used as a ground station or for sky-wave operation over long distances.

Frequency range 1.5 to 30 MHz. Power output, High Power 300 Watt PEP (SSB), 250 Watt CW, Low Power 40 Watt PEP (SSB), 25 Watt CW. Beta light illumination is provided to enable the meter and Setting Switches to be read in the dark.

The equipment operates from 28 VDC power supply which can have a wide variation in nominal voltage
Clansman Initiate Box BCC-425
The Clansman Initiate Box BCC-425 is used with the Clansman PRC-351 or the PRC-352 man-pack radio sets when they are installed and used in a vehicle configuration. The Initiate Box interfaces the man-pack radio set to the Antenna Tuning Unit BCC-543 (TUAAM) and to the vehicle antenna.

The TUAAM is normally fitted very near the antenna mast base of the vehicle or inside the antenna box typically found on Land Rovers wing. It automatically matches the selected frequency of the radio to the antenna installed in the vehicle to give optimum performance and achieve maximum range with the radio set. All Tuning and matching functions are carried out automatically by sensing the antenna impedance at the required operating frequency. NSN: 5820-99-630-6488.
£25.00 (Approximately US$ 32.00)
Clansman Intercom Kit
We have been asked many times for a easy Vehicle Intercom set-up. Here we have put together a Clansman intercom kit for up to 4 stations.

This intercom kit can be used stand alone with-out a radio in any vehicle having a battery voltage of 24-28 Volt DC. It can also be used with up to two Clansman radios connected to the intercom.

The main unit in this kit is the Interconnecting Box 3 radio IB3. The IB3 provides audio amplification and DC power for the rest of the boxes. The IB3 can have up to 3 radios connected if used with Crew Boxes 3 Set CB3 but in this setup we are using CB2 boxes which provide connection up to 2 Clansman radios. If you require CB3 boxes with this kit then please let us know.

The IB3 requires 24-28 Volt DC to operate. This is taken from the vehicles power source. The IB3 is fuse protected against short circuits. If radios are connected they can only to be operated in pairs, even if CB3 are used. The IB3 can also allow a remote user to be connected into the harness using a remote handset to communicate with the crew over the intercom but not to control any installed radio.

The IB3 is then daisy chained with 12 pin harness cables to the Crew Boxes CB2, see diagram below.

The CB2 boxes are the main unit by which the personnel can connect into the audio system. Each CB2 allows up to two headsets with Pressel Switches and / or handsets to be connected to the intercom system. The CB2 also allows the operator to select and operate either radio A or B and to monitor the other radio.

We have put together this intercom kit together for two, three and four operators. Each operator gets a CB2 box with a harness cable and a Headset with Pressel Switch. Please ask for other combinations of boxes and audio accessories.

Select from the list below for the number of operators required. All equipment is supplied in good working order.
£170.00 (Approximately US$ 217.60)
Clansman Intercom Kit with Active Noise Reduction ANR
We have been asked many times for a easy Vehicle Intercom set-up. Here we have put together a Clansman intercom kit for up to 4 stations. This set-up uses the Gold Top ANR Active Noise Reduction version of the Clansman harness boxes. The Active Noise Reduction reduces the background noise that maybe present while driving for better voice communication.

This intercom kit can be used stand alone with-out a radio in any vehicle having a battery voltage of 24-28 Volt DC. It can also be used with up to two Clansman radios connected to the intercom.

The main unit in this kit is the Interconnecting Box 3 radio IB3. The IB3 provides audio amplification and DC power for the rest of the boxes. The IB3 can have up to 3 radios connected if used with Crew Boxes 3 Set CB3 but in this setup we are using CB2 boxes which provide connection up to 2 Clansman radios. If you require CB3 boxes with this kit then please let us know.

The IB3 requires 24-28 Volt DC to operate. This is taken from the vehicles power source. The IB3 is fuse protected against short circuits. If radios are connected they can only to be operated in pairs, even if CB3 are used. The IB3 can also allow a remote user to be connected into the harness using a remote handset to communicate with the crew over the intercom but not to control any installed radio.

The IB3 is then daisy chained with 12 pin harness cables to the Crew Boxes CB2, see diagram below.

The CB2 boxes are the main unit by which the personnel can connect into the audio system. Each CB2 allows up to two headsets with Pressel Switches and / or handsets to be connected to the intercom system. The CB2 also allows the operator to select and operate either radio A or B and to monitor the other radio.

We have put together the ANR versions of this intercom kit together for two, three and four operators. Each operator gets a CB2 box with a harness cable and a ANR Headset with Pressel Switch. Please ask for other combinations of boxes and audio accessories.

Select from the list below for the number of operators required. All equipment is supplied in good working order.
£205.00 (Approximately US$ 262.40)
Clansman Interconnecting Box - Drivers Box (DB)
The Drivers Box DB is situated in the driver's compartment and provide normal Live Intercom and override facilities. Functions can be extended to the Turret by the use of a Drivers Box Set Selector DBS where a crew member in the turret can operate the system.
£28.50 (Approximately US$ 36.48)
Clansman Interconnecting Box 2-Radio (IB2)
This is the standard Clansman Interconnecting Box 2-Radio or IB2. The IB2 is the main unit in the Clansman vehicle harness. It provides the Intercom Amplifier, local/remote rebroadcast and a stabilised DC power supply for the rest of the harness and can be connected up to two Clansman radios. There is audio socket for the local operator, a remote user can also be connected into the harness to use an installed radio or to have intercommunication with the crew. Supplied in good working condition, Grade 2. NSN: 5820-99-117-6250.
£58.50 (Approximately US$ 74.88)
Clansman Interconnecting Box 2-Radio (IB2) ANR Version
This is the Clansman Gold Top ANR Active Noise Reduction version of the Interconnecting Box 2-Radio or IB2. The IB2 is the main unit in the Clansman vehicle harness. It provides the Intercom Amplifier, local/remote rebroadcast and a stabilised DC power supply for the rest of the harness and can be connected up to two Clansman radios. There is audio socket for the local operator, a remote user can also be connected into the harness to use an installed radio or to have intercommunication with the crew. Supplied in good working condition, Grade 2. NSN: 5820-99-125-4663.
£75.00 (Approximately US$ 96.00)
Clansman Interconnecting Box 3-Radio (IB3)
This is the standard Clansman Interconnecting Box 3-Radio or IB3. The IB3 is the main unit in the Clansman vehicle harness. It provides the Intercom Amplifier, local/remote rebroadcast and a stabilised DC power supply for the rest of the harness and can be connected up to three Clansman radios. There is audio socket for the local operator, a remote user can also be connected into the harness to use an installed radio or to have intercommunication with the crew. Supplied in good working condition, Grade 2. NSN:5820-99-117-6110.
£43.50 (Approximately US$ 55.68)
Clansman Interconnecting Box 3-Radio (IB3) ANR Version
This is the Clansman Gold Top ANR Active Noise Reduction version of the Interconnecting Box 3-Radio or IB3. The IB3 is the main unit in the Clansman vehicle harness. It provides the Intercom Amplifier, local/remote rebroadcast and a stabilised DC power supply for the rest of the harness and can be connected up to three Clansman radios. There is audio socket for the local operator, a remote user can also be connected into the harness to use an installed radio or to have intercommunication with the crew. Supplied in good working condition, Grade 2. NSN: 5820-99-842-2189.
£53.50 (Approximately US$ 68.48)
Clansman Land-Rover Wing Antenna / ATU Box
The Clansman vehicle Wing ATU/Antenna box normally mounts on the wing of a British Army Land-Rover and other fighting vehicles. ATU such as BCC-543 is fitted inside with the Antenna Mount on top. The antenna box ix intended for vehicle radio installations such as Clansman VRC-353.

The box along with antenna mount and rods can also be used with a normal broadcast car type radio / CD player or CB to keep your Land Rover looking original with-out fitting a military radio in the vehicle. NSN: 5820-99-637-0735. The box is supplied in good used condition. Antenna base and rods are available separately.
£45.00 (Approximately US$ 57.60)
Clansman Light-Weight Carry Frame / Back-Pack for PRC-320,344,351, 352
The light weight carry frame is used to carry a Clansman PRC-320, PRC-344 or PRC-351, PRC-352 and other Clansman back-pack radios. Supplied in good condition.
Clansman Loud-Speaker PM Free Standing
A free standing Clansman loud-speaker with volume control. The speaker can be connected directly to all Clansman radio equipment such as PRC-319, PRC-320, PRC-344, PRC-349, PRC-350, PRC-351, PRC-351M, PRC-352. It also works with Clansman vehicle radio sets such as VRC-321, VRC-322, VRC-353.

Supplied in good condition. NSN: 5965-99-117-6264.
£32.50 (Approximately US$ 41.60)
Clansman Mass Battery Charger ACCU
The Clansman mass battery charger ACCU
£325.00 (Approximately US$ 416.00)