Home :: American Radios :: RT-524/VRC VHF Vehicle Radio Station For M-151 Mutt Jeep, Humvee

RT-524/VRC VHF Vehicle Radio Station For M-151 Mutt Jeep, Humvee

RT-524/VRC VHF Vehicle Radio Station For M-151 Mutt Jeep, Humvee
SKU 1635
Weight 25.00 Kg
Equipment Grade Grade 2-3-4
£365.00 (Approximately US$ 467.20)
Choose Equipment Grade
Qty Sorry, This Item is Sold-Out!
Receiver-transmitter, FM, 30-74.95MHz, 50 KHZ spacing, 920 channels. Manual tuning version of RT-246/VRC with built-in loud-speaker. The RT-524/VRC is the major part of AN/VRC-12 vehicle radio station typically used in M151 Truck, Utility 1/4-Ton, 4x4 Mutt Jeeps series of vehicles as well as in older Humvee's and tanks.

Operates from 24 VDC vehicle battery or power supply. Transmitter output power 8W (low) and 35W (high).

Noise-operated squelch as well as an advanced tone-operated squelch (150 Hz) is provided. The tone squelch provides reliable retransmission when two receiver-transmitter are used as an automatic relay station.

The AN/VRC-12 is a combat-proven vehicular radio set that lends its self particularly well to applications of tactical deployment and specific operational missions because of their ability to be assembled into various configurations and of being installed on most types of military vehicles such as M-151 Mutt Jeeps, Humvees, heavy armour, etc.

The RT-524 is supplied in good working order Grade 2. Accessories and cables are also available. See Related products at the bottom of this page.

RT-524/VRC Specifications:
Frequency range 30.00 to 75.95 MHz
Channel spacing 50 kHz
Number of Channels 920 Channels
Mode of Operation Voice frequency modulated (FM)
Receiver stability Crystal controlled, + 3.5 kHz of nominal frequency
Receiver Sensitivity 0.5 ?V for 10 dB (S+N+D)/(N+D) for 8.0 kHz deviation
Transmitter output power 35 W High Power and 8 Watts Low Power
Transmitter deviation 8.0 ? 2 kHz nominal
Circuit Super-heterodyne single conversion
Image Rejection Greater than 85 dB
IF Bandwidth 32 kHz minimum @ 6 dB. 85 kHz maximum @ 60 dB
Squelch 150-Hz tone-operated or noise-operated, with RF signal having 10 dB (S+N+D)/(N+D) ratio
Limiting Less than 1 dB change in audio output for RF input from 1 ?V to 100,000 ?V
Distortion Less than 8% from 500 to 3000 Hertz
Audio Output 500 mW into 600-Ohm speaker 150 mW into 600-Ohm headphone
Volume Control Adjustable from less than 0.25 mW to 1.0 W maximum
Audio Pass-band 500Hz-3000Hz
X-Mode Provided
Operating Temperature -40?C to +65?C (-40?F to +14?F)
Power Requirement 24-28 VDC @10.0A
Dimensions 6H x 15W x 13D. (15.2 cm x 38.1 cm x 33 cm)
Weight 58 lbs. (26.3 kg)