10PT-12 Russian W.W.II. Russian Tank Receiver
Receiver section from a 10 RT Tank Radio Station, used in T-34, and KV heavy Tanks. Frequency range 3.75-6 Mhz.
24 Volt to 12 Volt Converter
Solid state voltage converter, Input 24 VDC, Output 12VDC. Fuse protected input/output and includes a mounting plate. Made in England by Powertron Ltd.
6 Volt 1.7Ah Rechargeable Nickel Cadmium Battery Pack
6 Volt Rechargeable Nickel Cadmium Battery Pack, rated capacity 1.7Ah. Believed to have been used in emergency lighting applications. Normal charge 170mA for 14 hours.
The battery pack measures 210mm long * 25mm in diameter, NSN: 6140-99-126-4421. The battery pack is supplied in used condition.
The battery pack measures 210mm long * 25mm in diameter, NSN: 6140-99-126-4421. The battery pack is supplied in used condition.
£12.50
(Approximately US$ 16.00)
800 Meters DON-10, WD1/TT, D-10 Twisted Pair Telephone Cable
Two core twisted pair high temperature, fire resistant DON10, WD1/TT, D10 Telephone Cable with breaking resistance of up to 1/2 Tonne! These cables are used over long distances to connect together field telephones, line equipment and field telephone exchanges as well as remote handsets to Clansman radios.
Each cable core is double insulated with Polyethylene insulated conductor and secondary nylon insulation, and is black in colour. Wire diameter including insulation is 4.64mm, wire strand thickness 0.28mm. Each core has 7 strands of wire, 4 of which are plated copper wire and 3 strands of steel wire for toughness.
Supplied in 800 meter canvas dispenser pack. NSN: 8130-99-115-8152, Canvas dispenser NSN: 8130-99-115-7761.
Each cable core is double insulated with Polyethylene insulated conductor and secondary nylon insulation, and is black in colour. Wire diameter including insulation is 4.64mm, wire strand thickness 0.28mm. Each core has 7 strands of wire, 4 of which are plated copper wire and 3 strands of steel wire for toughness.
Supplied in 800 meter canvas dispenser pack. NSN: 8130-99-115-8152, Canvas dispenser NSN: 8130-99-115-7761.
AB-129 Semi-Rigid Antenna Base
The AB-129 is a semi-rigid antenna base for use with PRC-8, PRC-9 and PRC-10 and other portable radios. The antenna base is used with the AT-271A long antenna rod and can be slightly bent to any position, acting as a shock absorber for the long antenna. Overall length 19.4 Cm.
Air Speed Indicator
Aircraft speed indicator in Knots. Made by Pandect Precision Components Ltd. in England, Part Number PPC-2367/79. Available in limited numbers, supplied in very good condition. Connection is by a 19 pin connector at the back of the unit. No further details are presently available.
£38.00
(Approximately US$ 48.64)
Airlite 62 Pilots Head-Set
The Airlite 62 pilots headsets are made by Clement Clarke International Ltd, in England and are available with normal or noise cancelling microphones and/or with PTT switch. The headsets are little used and are in good condition. CAA approval number WR603.
AirLite-62- Head-Set and Microphone with standard 6 pin jack plug.
AirLite-62NC- Head-Set with Noise cancelling Microphone, standard 6 pin jack plug.
AirLite-62NC/PTT- Head-Set with Noise cancelling Microphone, PTT Switch and standard 4 pin jack plug.
AirLite-62- Head-Set and Microphone with standard 6 pin jack plug.
AirLite-62NC- Head-Set with Noise cancelling Microphone, standard 6 pin jack plug.
AirLite-62NC/PTT- Head-Set with Noise cancelling Microphone, PTT Switch and standard 4 pin jack plug.
AM-1780/VRC Audio Amplifier for VIC-1 Vehicle Intercom System
The AM-1780 is the main junction box / audio amplifier for the AN/VIC-1 Vehicle Intercom System. It provides control of the 24 Volt DC power to the associated crewmember control boxes and to the radio system that may be connected to the amplifiers. The amplifiers also amplify and control the audio signals in the intercommunication (intercom) and radio circuits.
AN/VIC-1 Vehicle Intercom System Over-View
The AN/VIC-1 is a part of electrical harness of vehicles such as Tanks, Armoured Personnel Carriers and Self Propelled Howitzers. The AN/VIC-1 Intercommunications system provides tactical vehicle crew members with facilities for communications with radio connected to the system, as well as facilities for communicating with each other. It includes the AM-1780 and intercommunications remote control box C-2298. The number of remote control units used are dependent upon type of vehicle and its operational requirements.
AN/VIC-1 Vehicle Intercom System Over-View
The AN/VIC-1 is a part of electrical harness of vehicles such as Tanks, Armoured Personnel Carriers and Self Propelled Howitzers. The AN/VIC-1 Intercommunications system provides tactical vehicle crew members with facilities for communications with radio connected to the system, as well as facilities for communicating with each other. It includes the AM-1780 and intercommunications remote control box C-2298. The number of remote control units used are dependent upon type of vehicle and its operational requirements.
- Can support 2 Transmit / Receive radios and 2 Receive only radios.
- Provides up to six intercom stations.
- Push to talk can be selected for all stations or just the commanders station.
- Each intercom station can select ALL or Radios A/B/C or intercom only operation.
- Radio volume is reduced automatically when intercom is keyed.
- Passive mode operation of radio's audio when the system is not powered.
- Simplifies radio and intercom wiring.
- Stations can use a Headset, CVC Helmet, H-180 headphones, H-250 Handset or M-80 Microphone.
- Ruggedly constructed, water resistant and weather proof to military specification.
- Operates from 24 Volt DC vehicle power supply.
AM-66-A RF Power Amp
French made RF power amp for the GRC-9 radio set. 24 VDC input, Power output is about 100 Watts. Frequency Range 2-12 Mhz.
AN-130 Antenna for BC-1000
AN-130 Antenna for use with the American / French BC-1000 Radios. The antenna is in two sections that is extendable to total height of 83 Cm and has a flexible base. The antenna is supplied in very good condition.
AN/ARC-73 VHF Aircraft Transceiver
VHF Aircraft radio set made by Collins Radio Co. The radio set consists of , R-1123A (51X2B) receiver, T-879 (17L-7A) transmitter, C-4074 (614U) remote tuning control and MT-2699 rack. T-879 transmitter covers 116-149.95 Mhz AM in 50 KHz steps, 680 channels, 25 watts output. 100mw side-tone level into 500 Ohms, Mic impedance 100 Ohms, Antenna impedance 52 Ohms.
R-1123A receiver covers 108-151.95 Mhz in 50 KHz steps, 720 channels. Sensitivity 3uv, 500 Ohms audio, Antenna impedance 52 Ohms.
R-1123A receiver covers 108-151.95 Mhz in 50 KHz steps, 720 channels. Sensitivity 3uv, 500 Ohms audio, Antenna impedance 52 Ohms.
AN/PRC-25 Vietnam Era US Back-Pack VHF Radio
The AN/PRC-25 was the most widely used radio set in Vietnam war by the US troops. The radio is known as the Prick 25 and is very similar to the modern PRC-77 in looks and operation. The radio is a light weight Synthesised VHF man-pack, solid state with the exception of one tube. 2 Watts power output. The radio provides 920 channels in 2 VHF frequency bands 30-52.95 MHz, and 53-75.95 MHz FM, channel spacing 50 KHz. Requires 12.5-15 Volts DC @800 ma and 3 Volts DC for tube heater voltage. Frequency selection by front panel knobs, frequency display by digital mechanical read-out.
The radio is supplied in grade 2, serviced and tested condition and includes the battery box. Other accessories are not included, but maybe available seporatly, Please Ask!
The radio is supplied in grade 2, serviced and tested condition and includes the battery box. Other accessories are not included, but maybe available seporatly, Please Ask!
AN/SGC-1A Radio Teletype Terminal Set
The AN/SGC-1A Radio Teletype Terminal Set permitted the transmission and reception of radioteletype messages between stations that were similarly equipped. It employed 200 Hz audio frequency shift keying FSK using 500 and 700 Hz tones to represent mark and space conditions. This terminal set was manufactured in 1950 by the Remler Company Ltd. of San Francisco and operates from 115 VAC 50-60Hz. Supplied in good condition, Grade 3 Untested.
£125.00
(Approximately US$ 160.00)
Antenna Rod Set for MX-6707 Antenna Mast Base
AS-1730 Lower Antenna rod and AT-1095 Upper rod. For use with the MX-6707 Antenna Mast Base. Fibre glass construction. Total length 10.5 feet, 3.25 meters.
These rods were used in Hummvee and Mutt Jeeps with VHF radio sets sush as the RT-524/VRC and R-442/VRC.
These rods were used in Hummvee and Mutt Jeeps with VHF radio sets sush as the RT-524/VRC and R-442/VRC.
AT-271A Long Antenna Rod
The AT-271A long antenna rod is for use with PRC-8, PRC-9, and the PRC-10 and other portable radios. The antenna sections are connected together with steel wire and is made-up of seven sections totalling just over 3 meters in length. The antenna rods are to be used with AB-129 Semi-Rigid antenna base.
AT-272A Flexible Goose Neck
The AT-272A is the flexible antenna section for use with PRC-8, PRC-9 and PRC-10 and other portable radios. The goose neck is used with the AT-272A Tape antenna and can be bent to any position. Overall length 21Cm.
AT-272A Tape Antenna
The AT-272A Tape Antenna is for use with PRC-8, PRC-9, and PRC-10 and other portable radios. The antenna is very flexible and would not easily break. Total length 75.5 Cm.
ATU and Ground Plane Antenna for SEM-25/35
New and unissued ground plane antenna with ATU for the SEM-25 or SEM-35. Whip masts installed as three radiating elements and one vertical. Has 3 diameter ceramic feed-through insulator with UHF connection. A clamp allows installation on top of 1.6 diameter masts. Comes complete with antenna sections, cables and a canvas carry bag.
BA-279 Dry Battery
The BA-279 is the original battery for the PRC-8, PRC-9, and the PRC-10 series of radios. The BA-279 is supplied as New-Old-Stock. They are well past sell-by date and are probably dead. The battery's case is of metal construction and for those who like to keep radio equipment original is ideal for fitting a BA-511A PSU and batteries inside the case.
BA-511A Power Supplies for PRC-8,9, 10
Solid state French made Switch-Mode power supplies for the PRC-8,9, 10 military Manpack radios. Replacement to a BA-279 battery. Originally used 4 French PS-41 15 Volt batteries wired in series and parallel to produce 30VDC.
The PS-41 Batteries are no longer available, nonetheless the unit can be used with any other combination of batteries which produce 24-30 VDC. The unit then makes all the voltages necessary (1.5,6,67.5, 135 VDC) and plugs straight into the PRC-8,9, or 10 radio set. The actual power supply, less its surrounding metal work along with suitable batteries can comfortably fit inside the radios battery box.
BA-511A power supply can also be used with other radio sets requiring similar voltages.
The PS-41 Batteries are no longer available, nonetheless the unit can be used with any other combination of batteries which produce 24-30 VDC. The unit then makes all the voltages necessary (1.5,6,67.5, 135 VDC) and plugs straight into the PRC-8,9, or 10 radio set. The actual power supply, less its surrounding metal work along with suitable batteries can comfortably fit inside the radios battery box.
BA-511A power supply can also be used with other radio sets requiring similar voltages.
Base Aerial Support
5820-99-9490981, British made antenna mast base for British equipment and military vehicles.
BC-1000 Dummy Antenna Module A-28
American / French BC-1000 A-28 Dummy Antenna module. Used for adjusting and testing the BC-1000 transmitter output. Has a light indicator to show optimum setting.
£14.50
(Approximately US$ 18.56)
BC-1000 Man-Pack Receiver/Transmitters
These BC-1000's are from NATO surplus and are made in France under license from Motorola in USA.
40-48 MHz in forty one 200KHz steps, FM, IF 4.3 and 2.515 MHz, power output 300 mW RF, 200mW AF, transmission range up to 3 miles with the long antenna. The radio has a built-in 43 MHz crystal calibrator. Requires 4.5VDC 500 ma and 90VDC 25 ma. The radios have French markings and are dated late 40's or the early 50's.
The radio comes complete with the following accessories. CS-128 Battery Box, HS-30 Head Set, SW-141 Switch with Leather Strap, AN-130 Antenna, M-391 Pad, ST-50, ST-54 & ST-55 Straps, TM-11-242 Manual not in English.
40-48 MHz in forty one 200KHz steps, FM, IF 4.3 and 2.515 MHz, power output 300 mW RF, 200mW AF, transmission range up to 3 miles with the long antenna. The radio has a built-in 43 MHz crystal calibrator. Requires 4.5VDC 500 ma and 90VDC 25 ma. The radios have French markings and are dated late 40's or the early 50's.
The radio comes complete with the following accessories. CS-128 Battery Box, HS-30 Head Set, SW-141 Switch with Leather Strap, AN-130 Antenna, M-391 Pad, ST-50, ST-54 & ST-55 Straps, TM-11-242 Manual not in English.
BC-1000 Noise Canceling Microphone T-45
The T-45 microphone can be used with most war time American radios such as the BC-1000, BC-1306, GRC-9. The microphone is normally used along with the HS-30 headset and SW-141 PTT switch. The HS-30 and SW-141 are available separately.
The T-45 microphone is a carbon type Noise Canceling microphone designed for operation on a nominal current of 50 miliamps. The resistance of the unit is between 50 and 125 Ohms at 1000 cycles per second. Frequency response is substantially flat from 200 to 4000 cycles per second. The microphone is worn close to the operator
The T-45 microphone is a carbon type Noise Canceling microphone designed for operation on a nominal current of 50 miliamps. The resistance of the unit is between 50 and 125 Ohms at 1000 cycles per second. Frequency response is substantially flat from 200 to 4000 cycles per second. The microphone is worn close to the operator
£18.50
(Approximately US$ 23.68)
BC-1000 Radio Set Handset TS-15 For Spare Parts
The TS-15 handsets were normally used with BC-1000 radios and could have also been used with BC-1306 and GRC-9 as well as other war time radios, It has a PL-55 plug for the speaker and a PL-68 Socket for the microphone. The TS-15 handset has a built in PTT switch Push to Talk Switch.
Unfortunately these handsets do not have the speaker or microphone elements installed, other than that they are in good condition. Useful to recondition a TS-15 handset which has a bad cable or the rubber is rotting away.
Unfortunately these handsets do not have the speaker or microphone elements installed, other than that they are in good condition. Useful to recondition a TS-15 handset which has a bad cable or the rubber is rotting away.
£22.50
(Approximately US$ 28.80)
BC-1306 & GRC-9 Antenna Base IN-127
Antenna base for mobile configuration of GRC-9 and the BC-1306 radios. Attaches to the side of the radio. For GRC-9 radios you would also need a FT-515 Side Mounted Antenna Holder.
£38.50
(Approximately US$ 49.28)
BC-1306 & GRC-9 Antenna Rods & Generator storage Bag BG-174
BG-174 Canvas Bag for Antenna Equipment and GN-58 Legs & Seat. Used with GRC-9 and BC-1306 radio stations as well as some other radio stations. These bags are in used condition and may have some small holes or cuts.
£38.50
(Approximately US$ 49.28)
BC-1306 & GRC-9 Dynamotor DY-88
This is a Dynamotor from a DY-88 Power Supply, Motor Speed 6000 RPM.
Input Voltage: 7.2 Volts DC or 24.5 Volts DC or 29 Volts DC.Input Current: 22 Amps @7.2VDC or 11 Amps @24.5VDC or 5.5 Amps @29VDC.Output Voltage: 580 Volts.Output Current: 100 Mili-amps.
Input Voltage: 7.2 Volts DC or 24.5 Volts DC or 29 Volts DC.Input Current: 22 Amps @7.2VDC or 11 Amps @24.5VDC or 5.5 Amps @29VDC.Output Voltage: 580 Volts.Output Current: 100 Mili-amps.
£46.50
(Approximately US$ 59.52)
BC-1306 & GRC-9 Field Hand Crank Generator GN-58
GN-58 Field Hand Crank Generator for use with BC-1306 and GRC-9 radio sets. Outputs 425 VDC @115ma, 105 VDC @32ma, 6.3 VDC @2.5A, 1.4 VDC @465ma. The kit comes complete with Hand Cranks, Legs and Seat.
£108.50
(Approximately US$ 138.88)
BC-1306 & GRC-9 Remote Control Canvas Bag BG-186
For storage of the RC-261 Remote Control Kit. Used with the GRC-9, BC-1306 and other W.W.II radio stations. These bags are in used condition and may have some small holes or cuts.
BC-1306 & GRC-9 Remote Control Kit RC-261
RC-261 Wire Remote Control Kit, used with GRC-9, BC-1000, SCR-619, BC-1306, and other similar radio sets. This kit allows remote operation of a transceiver, from 0.5 Miles away, using 2 core field telephone wire. Has Hi/Low impedance matching switch, operates on 3 VDC using two BA-30 D cells.
RC-261 Remote Control Kit, Includes RM-53 Local Control Box and RM-52 Remote Control Box.
RC-261 Remote Control Kit, Includes RM-53 Local Control Box and RM-52 Remote Control Box.
£48.50
(Approximately US$ 62.08)
BC-1306 HF Radio Trasmitter - Receiver
Radio Set SCR-694 is a HF two-way radio Receiver / Transmitter and radio telegraph unit which can provide communication between moving or stationary vehicles, or as a portable field radio set. The radio set can provide communication for up to 15 miles on voice (AM) and 30 miles on (CW) between moving vehicles, and a much longer range if used in stationary position with a long antenna. Frequency range is 3,800 kHz - 6,500 Khz. Uses tubes and works from 6, 12 or 24 Volts DC.
BC-1306 SCR 694 Man-Pack - Field Station
This bundle is for the basic Man-Pack / Field installation. The basic bundle includes the following Items, additional items for the installation such as, speaker can be selected from the list below.
1) BC-1306 Radio Receiver / Transmitter.
2) GN-58 Hand Generator with Seat & Legs.
3) HS-30 Head Set.
4) T-17 Microphone.
5) CD-1086 Power Cable 2.14 Meters.
1) BC-1306 Radio Receiver / Transmitter.
2) GN-58 Hand Generator with Seat & Legs.
3) HS-30 Head Set.
4) T-17 Microphone.
5) CD-1086 Power Cable 2.14 Meters.
BC-1306 SCR 694 Stand Alone Station
This bundle is for the basic Man-Pack / Field installation. The basic bundle includes the following Items, additional items for the installation such as, speaker can be selected from the list below.
1) BC-1306 Radio Receiver / Transmitter.
2) DY-88 Dynamotor Power Supply with input cable.
3) HS-30 Head Set.
4) T-17 Microphone.
5) CD-1086 Power Cable 1.2 Meters.
1) BC-1306 Radio Receiver / Transmitter.
2) DY-88 Dynamotor Power Supply with input cable.
3) HS-30 Head Set.
4) T-17 Microphone.
5) CD-1086 Power Cable 1.2 Meters.
BC-1306 SCR 694 W.W.II Jeep Installation
This bundle is for the basic Jeep installation. The basic Jeep bundle includes the following Items, additional items for the jeep installation such as mounting plates, speaker can be selected from the list below.
1) BC-1306 Radio Receiver / Transmitter.
2) DY-88 Dynamotor Power Supply with input cable.
3) HS-30 Head Set.
4) T-17 Microphone.
5) CD-1086 Power Cable 2.14 Meters.
1) BC-1306 Radio Receiver / Transmitter.
2) DY-88 Dynamotor Power Supply with input cable.
3) HS-30 Head Set.
4) T-17 Microphone.
5) CD-1086 Power Cable 2.14 Meters.
BC-611 Power Supply Unit
Custom made specially for the BC-611 W.W.II. Radio sets. Uses 4 standard D size batteries to provide both LT, and HT supplies to the radio. No modifications is required. Power Supply and batteries fit neatly inside the BC-611.
BE 361/243/D - Sarbe Yellow
SARBE Beacon radio BE 361/243/D is a fully transistorised beacon transmitter operating on UHF 243 MHz. It is very small in size and has a built-in antenna which is released when the retaining pin is pulled out. Very difficult to get the antenna back in to place!
£26.50
(Approximately US$ 33.92)
BE310 - Sarbe 3 Battery
6135-99-519-2369, 13.5 Volt Battery, for BE310 - Sarbe 3 Rescue Radio. Dated 1994-1996.
BE310 - Sarbe 3 Rescue Radio
SAS versions (Green Colour) in rough condition. They include pull cord and antenna. They are Grade 3, untested off the pile. They probably work, we are not allowed to sell them as tested and serviced, you can imagine why!
BE310 Transistor Beacon with Speech, Rescue Radio, Tx / Rx , Emergency frequency 121.5 Mhz.Batteries are not available.
BE310 Transistor Beacon with Speech, Rescue Radio, Tx / Rx , Emergency frequency 121.5 Mhz.Batteries are not available.
BE310 - Sarbe 3 Yellow Rescue Radio
Sarbe 3 BE-310 (Yellow versions) in very good condition (almost new). Made in the 1960's they include pull cord and antenna. They are Grade 3, untested off the pile. They probably work, we are not allowed to sell them as tested and serviced, you can imagine why!
BE-310 Transistor beacon rescue radio with Speech, Tx / Rx Emergency frequency 121.5 Mhz.
A short film on these Sarbe Beacons can be found here on British Pathe website, see
http://www.britishpathe.com/video/sarbe-beacon
BE-310 Transistor beacon rescue radio with Speech, Tx / Rx Emergency frequency 121.5 Mhz.
A short film on these Sarbe Beacons can be found here on British Pathe website, see
http://www.britishpathe.com/video/sarbe-beacon
£35.00
(Approximately US$ 44.80)
BE375 - Sarbe 5 Battery
6135-99-626-5879, 12.15 Volt Battery, for BE375 - Sarbe 5 Rescue Radio. Dated 1994-1996.
BE375, Sarbe 5 - Special Forces (SAS) Rescue Radio
SAS versions (Green Colour) in good condition and including pull cord and antenna. They are Grade 3, untested off the pile. They probebley work, we are not allowed to sell them as tested and serviced, you can imagine why!
BE375 - Sarbe 5 Rescue Radio, Tx / Rx , Emergency frequency 243.0 Mhz, Auxiliary Frequency 282.8 Mhz. Batteries are not available.
BE375 - Sarbe 5 Rescue Radio, Tx / Rx , Emergency frequency 243.0 Mhz, Auxiliary Frequency 282.8 Mhz. Batteries are not available.
BG-150 Accessories Bag For BC-1000 Radio
The BG-150 canvas accessories bag for the BC-1000 radio. It consists of three compartments, the first for the storage of AN-130 antenna, the second for storage of AN-131 antenna and the third for storage of TS-15 hand set and HS-30 headset. These bags are in used condition and may have some small holes or cuts.
BG-172 Canvas Accessories Bag for GRC-9 and BC-1306
Canvas Bag for long-wire antennas, cables, and other accessories for the GRC-9 and BC-1306 radio stations. These bags are in used condition and may have some small holes or cuts.
BG-175 Generator Canvas Bag
BG-175 Canvas Bag for carrying GN-58 Hand Generator. Used with GRC-9 and BC-1306 radio stations as well as some other radio stations. These bags are in used condition and may have some small holes or cuts.
Bowman H-4855 PRC-343 Personal Role Radio PRR Radio Pouch Type SL32A/6018
This is the British Army MOD issue DPM Personal Role Radio PRR pouch. It fit's a Bowman H-4855 PRC-343 radio, made from Infra-Red resistant heavy duty woodland pattern camouflaged Cordura. The pouch can be attached to existing PLCE Yoke or Belt.
The pouch has two belts or yoke loops and four female press studs on rear. Four press studs on the front to safely lock the radio into position. Velcro flap for quick access and an adjustable quick release buckle.
Approximate Size 4 Wide, 8 Long and 2 Deep. Supplied in very good used condition. NSN: 8465-99-978-7651.
The pouch has two belts or yoke loops and four female press studs on rear. Four press studs on the front to safely lock the radio into position. Velcro flap for quick access and an adjustable quick release buckle.
Approximate Size 4 Wide, 8 Long and 2 Deep. Supplied in very good used condition. NSN: 8465-99-978-7651.
£18.50
(Approximately US$ 23.68)

