Home :: Radios and Equipment :: R-442/VRC VHF Vehicle Radio Receiver For M-151 Mutt Jeep, Humvee

R-442/VRC VHF Vehicle Radio Receiver For M-151 Mutt Jeep, Humvee

R-442/VRC VHF Vehicle Radio Receiver For M-151 Mutt Jeep, Humvee
SKU 1636
Weight 10.00 Kg
Equipment Grade Grade 2-3-4
£225.00 (Approximately US$ 288.00)
Choose Equipment Grade
Qty
The R-442/VRC is a VHF FM radio receiver working in the 30-75.95 MHz range and has 920 channels.This receiver is part of AN/VRC-12 vehicle radio station, typically used in M151 Truck, Utility: ?-Ton, 4x4 Mutt Jeeps series of vehicles as well as in older Humvee's and Tanks. The radio can be used on its own as a VHF receiver or with the RT-524 as auxiliary receiver. The radio receiver operates from 24-28 VDC @0.75A.

The R-442/VRC is supplied in good working order Grade 2. Accessories and cables are also available. See Related products at the bottom of this page.


R-442/VRC Specifications:
Frequency range 30.00 to 75.95 MHz
Channel spacing 50 kHz
Number of Channels 920 Channels
Mode of Operation Voice frequency modulated (FM)
Receiver stability Crystal controlled, + 3.5 kHz of nominal frequency
Receiver Sensitivity 0.5 ?V for 10 dB (S+N+D)/(N+D) for 8.0 kHz deviation
Circuit Super-heterodyne single conversion
Image Rejection Greater than 85 dB
IF Bandwidth 32 kHz minimum @ 6 dB. 85 kHz maximum @ 60 dB
Squelch 150-Hz tone-operated or noise-operated, with RF signal having 10 dB (S+N+D)/(N+D) ratio
Limiting Less than 1 dB change in audio output for RF input from 1 ?V to 100,000 ?V
Distortion Less than 8% from 500 to 3000 Hertz
Audio Output 500 mW into 600-Ohm speaker 150 mW into 600-Ohm headphone
Volume Control Adjustable from less than 0.25 mW to 1.0 W maximum
Operating Temperature -40?C to +65?C (-40?F to +14?F)
Power Requirement 24-28 VDC @0.75A
Dimensions 6H x 5W x 13D. (15.2 cm x 12.7 cm x 33 cm).
Weight 18.5 lbs. (8.4 kg).