Home :: Radios and Equipment

Radios and Equipment

Products

6 Volt 1.7Ah Rechargeable Nickel Cadmium Battery Pack
6 Volt Rechargeable Nickel Cadmium Battery Pack, rated capacity 1.7Ah. Believed to have been used in emergency lighting applications. Normal charge 170mA for 14 hours.

The battery pack measures 210mm long * 25mm in diameter, NSN: 6140-99-126-4421. The battery pack is supplied in used condition.
£12.50 (Approximately US$ 16.00)
Air Speed Indicator
Aircraft speed indicator in Knots. Made by Pandect Precision Components Ltd. in England, Part Number PPC-2367/79. Available in limited numbers, supplied in very good condition. Connection is by a 19 pin connector at the back of the unit. No further details are presently available.
£38.00 (Approximately US$ 48.64)
AN/SGC-1A Radio Teletype Terminal Set
The AN/SGC-1A Radio Teletype Terminal Set permitted the transmission and reception of radioteletype messages between stations that were similarly equipped. It employed 200 Hz audio frequency shift keying FSK using 500 and 700 Hz tones to represent mark and space conditions. This terminal set was manufactured in 1950 by the Remler Company Ltd. of San Francisco and operates from 115 VAC 50-60Hz. Supplied in good condition, Grade 3 Untested.
£125.00 (Approximately US$ 160.00)
BC-1000 Dummy Antenna Module A-28
American / French BC-1000 A-28 Dummy Antenna module. Used for adjusting and testing the BC-1000 transmitter output. Has a light indicator to show optimum setting.
£14.50 (Approximately US$ 18.56)
BC-1000 Noise Canceling Microphone T-45
The T-45 microphone can be used with most war time American radios such as the BC-1000, BC-1306, GRC-9. The microphone is normally used along with the HS-30 headset and SW-141 PTT switch. The HS-30 and SW-141 are available separately.

The T-45 microphone is a carbon type Noise Canceling microphone designed for operation on a nominal current of 50 miliamps. The resistance of the unit is between 50 and 125 Ohms at 1000 cycles per second. Frequency response is substantially flat from 200 to 4000 cycles per second. The microphone is worn close to the operator
£18.50 (Approximately US$ 23.68)
BC-1000 Radio Set Handset TS-15 For Spare Parts
The TS-15 handsets were normally used with BC-1000 radios and could have also been used with BC-1306 and GRC-9 as well as other war time radios, It has a PL-55 plug for the speaker and a PL-68 Socket for the microphone. The TS-15 handset has a built in PTT switch Push to Talk Switch.

Unfortunately these handsets do not have the speaker or microphone elements installed, other than that they are in good condition. Useful to recondition a TS-15 handset which has a bad cable or the rubber is rotting away.
£22.50 (Approximately US$ 28.80)
BC-1306 & GRC-9 Antenna Base IN-127
Antenna base for mobile configuration of GRC-9 and the BC-1306 radios. Attaches to the side of the radio. For GRC-9 radios you would also need a FT-515 Side Mounted Antenna Holder.
£38.50 (Approximately US$ 49.28)
BC-1306 & GRC-9 Antenna Rods & Generator storage Bag BG-174
BG-174 Canvas Bag for Antenna Equipment and GN-58 Legs & Seat. Used with GRC-9 and BC-1306 radio stations as well as some other radio stations. These bags are in used condition and may have some small holes or cuts.
£38.50 (Approximately US$ 49.28)
BC-1306 & GRC-9 Dynamotor DY-88
This is a Dynamotor from a DY-88 Power Supply, Motor Speed 6000 RPM.

Input Voltage: 7.2 Volts DC or 24.5 Volts DC or 29 Volts DC.Input Current: 22 Amps @7.2VDC or 11 Amps @24.5VDC or 5.5 Amps @29VDC.Output Voltage: 580 Volts.Output Current: 100 Mili-amps.
£46.50 (Approximately US$ 59.52)
BC-1306 & GRC-9 Field Hand Crank Generator GN-58
GN-58 Field Hand Crank Generator for use with BC-1306 and GRC-9 radio sets. Outputs 425 VDC @115ma, 105 VDC @32ma, 6.3 VDC @2.5A, 1.4 VDC @465ma. The kit comes complete with Hand Cranks, Legs and Seat.
£108.50 (Approximately US$ 138.88)
BC-1306 & GRC-9 Remote Control Kit RC-261
RC-261 Wire Remote Control Kit, used with GRC-9, BC-1000, SCR-619, BC-1306, and other similar radio sets. This kit allows remote operation of a transceiver, from 0.5 Miles away, using 2 core field telephone wire. Has Hi/Low impedance matching switch, operates on 3 VDC using two BA-30 D cells.

RC-261 Remote Control Kit, Includes RM-53 Local Control Box and RM-52 Remote Control Box.
£48.50 (Approximately US$ 62.08)
BE 361/243/D - Sarbe Yellow
SARBE Beacon radio BE 361/243/D is a fully transistorised beacon transmitter operating on UHF 243 MHz. It is very small in size and has a built-in antenna which is released when the retaining pin is pulled out. Very difficult to get the antenna back in to place!
£26.50 (Approximately US$ 33.92)
BE310 - Sarbe 3 Yellow Rescue Radio
Sarbe 3 BE-310 (Yellow versions) in very good condition (almost new). Made in the 1960's they include pull cord and antenna. They are Grade 3, untested off the pile. They probably work, we are not allowed to sell them as tested and serviced, you can imagine why!

BE-310 Transistor beacon rescue radio with Speech, Tx / Rx Emergency frequency 121.5 Mhz.

A short film on these Sarbe Beacons can be found here on British Pathe website, see

http://www.britishpathe.com/video/sarbe-beacon
£35.00 (Approximately US$ 44.80)
BE375, Sarbe 5 - Special Forces (SAS) Rescue Radio
SAS versions (Green Colour) in good condition and including pull cord and antenna. They are Grade 3, untested off the pile. They probebley work, we are not allowed to sell them as tested and serviced, you can imagine why!

BE375 - Sarbe 5 Rescue Radio, Tx / Rx , Emergency frequency 243.0 Mhz, Auxiliary Frequency 282.8 Mhz. Batteries are not available.
Bowman H-4855 PRC-343 Personal Role Radio PRR Radio Pouch Type SL32A/6018
This is the British Army MOD issue DPM Personal Role Radio PRR pouch. It fit's a Bowman H-4855 PRC-343 radio, made from Infra-Red resistant heavy duty woodland pattern camouflaged Cordura. The pouch can be attached to existing PLCE Yoke or Belt.

The pouch has two belts or yoke loops and four female press studs on rear. Four press studs on the front to safely lock the radio into position. Velcro flap for quick access and an adjustable quick release buckle.

Approximate Size 4 Wide, 8 Long and 2 Deep. Supplied in very good used condition. NSN: 8465-99-978-7651.
£18.50 (Approximately US$ 23.68)
BX-53 Spare Parts and Tube Box Empty Box
Empty BX-53 Spares and Tube box for the BC-1306 and GRC-9 Radios.
Please note: the pictures shows a full box with spare parts.
£18.50 (Approximately US$ 23.68)
Centre Junction Dipole Balun
This is a Clansman Centre Junction Dipole Balun. A Balun is a device that interfaces or matches the balanced antenna input of a radio to an unbalanced antenna load and is mainly connected to HF man-pack radios connected to a dipole wire antenna. The word Balun is derived from the words of BALanced to UNbalanced. A common example of where a Balun would be needed is at the feed point of a dipole antenna when a coaxial antenna wire from a radio is used. If a Balun is not used then the radios performance would be affected. NSN: 5985-99-620-9535. Supplied in good condition.
£32.50 (Approximately US$ 41.60)
Clansman 1.2 Meter MK6 Whip Antenna for PRC-350, PRC-351, PRC-352
Clansman 1.2 Meter MK6 Whip Antenna for PRC-350, PRC-351, PRC-352 Man-Pack radios. There are 4 sections to this antenna, when erected the total length is 120 Cm (47 inch). The antenna plugs in to the antenna socket of the radio. Supplied in very good condition. NSN: 5985-99-661-6201.
£18.50 (Approximately US$ 23.68)
Clansman 14.4/24 Volt Dual Battery Adapter Charging Tray
This is the Clansman 14.4/24 Volt Dual Battery Adapter Charging Tray, when connected to a Clansman DCCU Charger would charge two of the following batteries at the same time.

Two Clansman 24 Volt 1 or 4 Amp Rechargeable batteries as used with the Clansman PRC-319, PRC-320, PRC-344, PRC-351, PRC-352 radio sets. Or two 14.4 volt 4 Amp Rechargeable Batteries that are typically used with the Clansman PRC-350 radios, or one of each type.

Battery tie down straps with two charging indicator lights and a switch to turn them off is on top of the unit along with the 4-pin DCCU Charging socket. These units are supplied in good used condition, tested and operational. DCCU connecting lead and batteries are available separately. NSN: 6130-99-132-0689
£75.00 (Approximately US$ 96.00)
Clansman 3 Way Power Distribution Box
This is the Clansman 3 way power distribution box. It connects to 12-14 or 24-28 Volt DC power supply of a vehicle or power supply using the bolt on fly leads and provides 3 fuse protected 2 pin power outlets to connect to Clansman equipment such as VRC-353 or VRC-321 radio stations. Supplied in very good condition.
£33.50 (Approximately US$ 42.88)
Clansman Adapter Unit
Converts 7 pin Clansman audio to US style audio equipment. Has 5 pin US U-229/U style Connector.
Clansman Amplifier AF Loudspeaker (A-AFL)
Amplifier AF loudspeaker is an audio amplifier which can be connected in to the harness ring and used to select and amplify a radio or intercom signal. It can drive up to four fixed or free standing loudspeakers and it can also be used completely separate from the harness using an independent 24-28 volt power source. Vehicle radios that are supported in a harness are VRC-321, VRC-322, VRC-353 as well as some Clansman Man-Pack radios that are installed in vehicles with a harness. NSN: 5820-99-117-6143. Supplied in untested Grade 3 condition.
£36.50 (Approximately US$ 46.72)
Clansman Amplifier Intercommunications Box (AIB)
Normally used on the rear exterior of a Self Propelled Artillery Vehicle, the Clansman Amplifier Intercommunications Box (AIB) provides cordless intercommunications between the interior of vehicle and ammunition numbers outside the vehicle.

It is switched on at the Radio Lines Box (RLB) and allows ammunition numbers to monitor the harness intercommunications channel or to be addressed by the commander. The unit has a Press-To-Talk button to permit ammunition numbers to reply by connecting the loud-speaker in to the harness circuit as a microphone!

An internal microphone amplifier inside the AIB raises the output level of the loud-speaker to a level compatible with the other crew box outputs. Volume control of the loudspeaker is controlled by the volume knob on the AIB.

A standard 7-pin Clansman Headset or Handset can be externally connected to the AIB using the socket provided. NSN: 5820-99-633-6562. Supplied in untested condition, Grade 3.
£32.50 (Approximately US$ 41.60)
Clansman ARFAT RF Antenna Tuning Box for VRC-353
RF Antenna Tuning interface box ARFAT is used with the Clansman VRC-353 vehicle radio set. The box interfaces the ARFAT control signals from the radio to the Racal VHF Automatic Antenna Tuning Unit BCC-543. Supplied in good condition.
£37.50 (Approximately US$ 48.00)
Clansman Base Aerial Support No. 31 MK2
Clansman Base Aerial Support No. 31 MK2 made by Racal Antennas Ltd., England. It takes the standard Clansman vehicle antenna rods and mounts on top of the Land Rover wing antenna box. The antenna base includes the base plate spacer
£32.00 (Approximately US$ 40.96)
Clansman Base Aerial Support No. 31 MK6
Clansman Base Aerial Support No. 31 MK6 made by Racal Antennas Ltd., England. Modern type of vehicle antenna base with quick release antenna rod holder. It takes the standard Clansman vehicle antenna rods and mounts on top of the Land Rover wing antenna box. The antenna base includes the base plate spacer
£35.00 (Approximately US$ 44.80)
Clansman Base Aerial Support Rubber Gasket
New Rubber gasket for the Racal antenna Bases, 5330-99-949-1082.
This grubber gasket is suitable for the Clansman Base Aerial Support No. 31 MK6 and Clansman Base Aerial Support No. 31 MK2
£7.50 (Approximately US$ 9.60)
Clansman Commanders 5-Radio Junction Box (C5RJB)
Commanders 5-Radio Junction Box is used to connect five radios in a Clansman harness system.
£24.50 (Approximately US$ 31.36)
Clansman Commanders Box Fixed (CBF)
The Commander's Box Fixed CBF is used with the Commander's Personal Unit CPU which together provide all the facilities of the CB2 Crew Box. The controls are duplicated on the CPU which is held by a webbing strap around the commander's neck. The CBF will accept an independent pressel and signals from a Central Warning Indicator.
£28.50 (Approximately US$ 36.48)
Clansman Commanders Box Fixed (CBF) Digital
This is the Digital version of the Commander's Box Fixed CBF. It is used with the Commander's Personal Unit CPU which together provide all the facilities of the CB2 Crew Box. The controls are duplicated on the CPU which is held by a webbing strap around the commander's neck. The CBF will accept an independent pressel and signals from a Central Warning Indicator. NSN: 5820-99-661-4263.
£32.50 (Approximately US$ 41.60)
Clansman Commanders Personal Unit (CPU)
The Clansman Commanders Personal Unit (CPU) which is held by a webbing strap around around the commanders neck. It gives access to the harness with intercom and radio facilities or direct in to a radio. Call is available when working harness or radio direct. It is used with ear-defending headgear and is fitted with snatch release from both headgear and neck-strap. NSN: 5820-99-117-5043. Supplied in good condition.
£18.50 (Approximately US$ 23.68)
Clansman Crew Box 2-Set (CB2)
The CB2 is the standard Clansman Harness Crew Box. It gives the crew member access through the harness to either of the two radios as a working set and simultaneously to the other for monitoring purposes. Volume controls are provided for both the working set and the monitor set. Supplied in good working condition, Grade 2. NSN: 5895-99-117-4911.
£28.50 (Approximately US$ 36.48)
Clansman Crew Box 2-Set (CB2) ANR Version
This is the Clansman Gold Top ANR Active Noise Reduction version of the Crew Box 2 Set. The CB2 is the standard Clansman Harness Crew Box. It gives the crew member access through the harness to either of the two radios as a working set and simultaneously to the other for monitoring purposes. Volume controls are provided for both the working set and the monitor set. Supplied in good working condition, Grade 2. NSN: 5895-99-477-3716.
£33.50 (Approximately US$ 42.88)
Clansman Crew Box 3-Set (CB3)
The Clansman Crew Box 3 Set CB3 is the standard Clansman Harness Crew Box. It gives the crew member access through the harness to either of the three radios as a working set and simultaneously to the other for monitoring purposes. Volume controls are provided for both the working set and the monitor set. Supplied in good working condition, Grade 2. NSN: 5895-99-117-4910.
£33.50 (Approximately US$ 42.88)
Clansman Crew Box 3-Set (CB3) ANR Version
This is the Clansman Gold Top ANR Active Noise Reduction version of the Crew Box 2 Set. The CB3 is the standard Clansman Harness Crew Box. It gives the crew member access through the harness to either of the three radios as a working set and simultaneously to the other for monitoring purposes. Volume controls are provided for both the working set and the monitor set. Supplied in good working condition, Grade 2. NSN: 5895-99-234-2743.
£38.50 (Approximately US$ 49.28)
Clansman Elevated Wide Band VHF Antenna Kit The Pineapple Antenna
This is the Clansman Elevated Wide Band VHF Antenna Kit. Wide band antennas can work with-out an ATU Antenna Tuner Unit
£80.00 (Approximately US$ 102.40)
Clansman GS Back-Pack / Vehicle Fixing Frame for PRC-320,344,351, 352 Radios
The standard GS carry frame is used to carry a Clansman PRC-320, PRC-344 or PRC-351, PRC-352 and other Clansman back-pack radios. Can also be fixed into a vehicle using a GS fitting frame. Supplied in good condition.
£45.00 (Approximately US$ 57.60)
Clansman Hand-Set Storage Pouch
This is a British Army MOD issue handset storage pouch for Clansman Handsets. It is Intended for the Clansman PRC-350 radio kit but can be used with all other back pack radio handsets. The pouch has two belts or yoke loops that can be attached to existing PLCE Yoke or Belt. The Pouch has a zip opening that allows easy access to the handset. Supplied in good used condition. NSN: 5965-99-620-8031.
£8.50 (Approximately US$ 10.88)
Clansman Harness Interconnecting Box 12-Way IB12
The Clansman Harness Interconnecting Box 12-way (IB12) is a junction box with Three 12 pin sockets for connection into the harness ring to provide one spur outlet to the Emergency Crew Control equipment (ECC) and another to other boxes installed in the vehicles hull. There are no operator controls on the box. Part Number FV759770.
£18.50 (Approximately US$ 23.68)
Clansman Harness Interconnecting Box 12-Way-4
The Clansman Harness Interconnecting Box 12-way-4 is a junction box with Four 12 pin sockets for connection into the Clansman harness ring to provide one spur outlet to the Emergency Crew Control equipment (ECC) or to other harness boxes installed in the vehicles hull. There are no operator controls on the box. Part Number FV990560.
£18.50 (Approximately US$ 23.68)
Clansman Harness Rebroadcast Box
Provides rebroadcast facilities using two installed radios through the Clansman vehicle harness or one radio by remote line and one in Harness.
£28.50 (Approximately US$ 36.48)
Clansman Initiate Box BCC-425
The Clansman Initiate Box BCC-425 is used with the Clansman PRC-351 or the PRC-352 man-pack radio sets when they are installed and used in a vehicle configuration. The Initiate Box interfaces the man-pack radio set to the Antenna Tuning Unit BCC-543 (TUAAM) and to the vehicle antenna.

The TUAAM is normally fitted very near the antenna mast base of the vehicle or inside the antenna box typically found on Land Rovers wing. It automatically matches the selected frequency of the radio to the antenna installed in the vehicle to give optimum performance and achieve maximum range with the radio set. All Tuning and matching functions are carried out automatically by sensing the antenna impedance at the required operating frequency. NSN: 5820-99-630-6488.
£32.00 (Approximately US$ 40.96)
Clansman Interconnecting Box - Drivers Box (DB)
The Drivers Box DB is situated in the driver's compartment and provide normal Live Intercom and override facilities. Functions can be extended to the Turret by the use of a Drivers Box Set Selector DBS where a crew member in the turret can operate the system.
£28.50 (Approximately US$ 36.48)
Clansman Interconnecting Box 2-Radio (IB2)
This is the standard Clansman Interconnecting Box 2-Radio or IB2. The IB2 is the main unit in the Clansman vehicle harness. It provides the Intercom Amplifier, local/remote rebroadcast and a stabilised DC power supply for the rest of the harness and can be connected up to two Clansman radios. There is audio socket for the local operator, a remote user can also be connected into the harness to use an installed radio or to have intercommunication with the crew. Supplied in good working condition, Grade 2. NSN: 5820-99-117-6250.
£58.50 (Approximately US$ 74.88)
Clansman Interconnecting Box 2-Radio (IB2) ANR Version
This is the Clansman Gold Top ANR Active Noise Reduction version of the Interconnecting Box 2-Radio or IB2. The IB2 is the main unit in the Clansman vehicle harness. It provides the Intercom Amplifier, local/remote rebroadcast and a stabilised DC power supply for the rest of the harness and can be connected up to two Clansman radios. There is audio socket for the local operator, a remote user can also be connected into the harness to use an installed radio or to have intercommunication with the crew. Supplied in good working condition, Grade 2. NSN: 5820-99-125-4663.
£75.00 (Approximately US$ 96.00)
Clansman Interconnecting Box 3-Radio (IB3)
This is the standard Clansman Interconnecting Box 3-Radio or IB3. The IB3 is the main unit in the Clansman vehicle harness. It provides the Intercom Amplifier, local/remote rebroadcast and a stabilised DC power supply for the rest of the harness and can be connected up to three Clansman radios. There is audio socket for the local operator, a remote user can also be connected into the harness to use an installed radio or to have intercommunication with the crew. Supplied in good working condition, Grade 2. NSN:5820-99-117-6110.
£43.50 (Approximately US$ 55.68)
Clansman Interconnecting Box 3-Radio (IB3) ANR Version
This is the Clansman Gold Top ANR Active Noise Reduction version of the Interconnecting Box 3-Radio or IB3. The IB3 is the main unit in the Clansman vehicle harness. It provides the Intercom Amplifier, local/remote rebroadcast and a stabilised DC power supply for the rest of the harness and can be connected up to three Clansman radios. There is audio socket for the local operator, a remote user can also be connected into the harness to use an installed radio or to have intercommunication with the crew. Supplied in good working condition, Grade 2. NSN: 5820-99-842-2189.
£53.50 (Approximately US$ 68.48)
Clansman Interconnecting Box Radio Adapter (IBRA)
The interconnecting Box Radio Adapter enables Clansman Radios to be used to their full potential in a Larkspur harness, and provides the Intercom Amplifier for the Larkspur Harness.
Clansman Land-Rover Wing Antenna / ATU Box
The Clansman vehicle Wing ATU/Antenna box normally mounts on the wing of a British Army Land-Rover and other fighting vehicles. ATU such as BCC-543 is fitted inside with the Antenna Mount on top. The antenna box ix intended for vehicle radio installations such as Clansman VRC-353.

The box along with antenna mount and rods can also be used with a normal broadcast car type radio / CD player or CB to keep your Land Rover looking original with-out fitting a military radio in the vehicle. NSN: 5820-99-637-0735. The box is supplied in good used condition. Antenna base and rods are available separately.
£48.50 (Approximately US$ 62.08)
Clansman PRC-320 Back-Pack Frame Adaptor
The Clansman PRC-320 Back-Pack Adaptor. The two pieces of metal adapters screw on to the back side of the radio allowing the radio to be mounted on a Clansman GS or a Light Weight carry frame. Supplied with fixing screws.
£22.50 (Approximately US$ 28.80)