Length 18cm, Height 16cm, Width 12cm (Length 7, Height 6.5, Width 4.75), Weight 2.5Kg.
The radio is supplied in good tested condition and includes the battery box with D Size Battery Adapter, but no other accessories!
Here is what is available for this radio station. They are all supplied in nice untested condition.
2* RF Heads Band 1 >>>> £175 each
1* RF Head Band II >>>> £185
1* System Module H-102-7100-01 >>>> £245
Operating frequency of this RF amplifier is in the VHF band of 30-76 Mhz in 3 selectable ranges: 30-40 Mhz, 40-55 Mhz, 55-76 Mhz. Requires 24 VDC to operate.
The amplifier can not be used on high power transmit using the radios normal whip antenna and instead a Ground-Spike Antenna is used. The amplifier can only be used on high power as a fixed radio station or in a vehicle using the vehicles antenna system. For mobile man-pack operations the battle antenna is fitted and the radio is operated on low power bypassing the amplifier as a PRC-351.
The RF amplifier works with other VHF radios and needs about 1.5 watts of input power to produce 20 Watts of output power. Connections are by standard BNC antenna plugs. NSN: 5820-99-114-3640. Supplied in good condition.
BE375 - Sarbe 5 Rescue Radio, Tx / Rx , Emergency frequency 243.0 Mhz, Auxiliary Frequency 282.8 Mhz. Batteries are not available.
BE-310 Transistor beacon rescue radio with Speech, Tx / Rx Emergency frequency 121.5 Mhz.
A short film on these Sarbe Beacons can be found here on British Pathe website, see
http://www.britishpathe.com/video/sarbe-beacon
These radios were used by Russian and East German armies to provide radio communication within the Division at all levels down to Company HQ, Infantry and Artillery. Operating in one continuous band, output power is approximately 1.2 Watts. Modulation FM. Power was provided by two sets of 2.4V rechargeable batteries which are no longer available. This radio is a P-105D with metal case, frequancy range VHF 36-46.1 Mhz. Supplied in very nice untested condition with some accessories!
P-105M VHF 36-46.1 Mhz.
Input Voltage: 7.2 Volts DC or 24.5 Volts DC or 29 Volts DC.Input Current: 22 Amps @7.2VDC or 11 Amps @24.5VDC or 5.5 Amps @29VDC.Output Voltage: 580 Volts.Output Current: 100 Mili-amps.
RC-261 Remote Control Kit, Includes RM-53 Local Control Box and RM-52 Remote Control Box.
Receiver Section, covers 2-3.6, 3.6-6.6, and 6.6-12 MHz continuously tuneable in 3 bands AM-CW, 456 KHz IF, 200 KHz Calibration Points. AF and RF Gain Controls and Headset jacks. Tubes 2* 1L4, 3* 1R5, 1* 1S5, 1* 3Q4. May require a new grid bias battery. Requires 1.4 VDC @450ma and 105 V @20ma.
Please note: the pictures shows a full box with spare parts.
Operates from 24 VDC vehicle battery or power supply. Transmitter output power 8W (low) and 35W (high).
Noise-operated squelch as well as an advanced tone-operated squelch (150 Hz) is provided. The tone squelch provides reliable retransmission when two receiver-transmitter are used as an automatic relay station.
The AN/VRC-12 is a combat-proven vehicular radio set that lends its self particularly well to applications of tactical deployment and specific operational missions because of their ability to be assembled into various configurations and of being installed on most types of military vehicles such as M-151 Mutt Jeeps, Humvees, heavy armour, etc.
The RT-524 is supplied in good working order Grade 2. Some Accessories and cables are also available.
The R-442/VRC is supplied in good working order Grade 2. Some accessories and cables are also available.
The handle protectors are supplied in pairs left and right side and are in used condition, as removed from radios.
R-1051B Radio receiver, frequency range 2-30 MHz, 2-4 microvolt sensitivity, direct digital frequency synthesis, 0.1 KHz tuning increments, modes of operation USB, LSB, ISB, AM and FSK. Bandwidths: 3.1 and 6 KHz depending to operating mode. Operates from 115 VAC 48-450 Hz 55 Watt. Made in USA by General dynamics.
The R-1051B is a Triple conversion Superheterodyne HF receiver. Solid state construction except for two 6BZ6 tubes, which are used as the RF amplifiers in the front end delivering excellent performance and immunity to signal overload. The receiver is isolated against signal leakage to prevent enemy detection of the local oscillators.
The frequency selection is done by turning mechanical decade knobs. The Mhz stage is tuned by an internal motor. Frequency stability is 1X10-8 per day! The B model has a 100 Hz synthesizer which can be unlock for accurate tuning.
The receiver is supplied tested and operational Grade 2. Grade 3 Untested may also be available, please E-Mail for details.
R-1051B Receiver Specifications:
Frequency Range: 2.0 to 29.9999 MHz in 0.1 kHz increments
Receiver Type: Triple conversion Superheterodyne
Frequency Stability: 1 part in 10 to the 8th power per day
Frequency Accuracy: plus or minus 0.5 Hz at 5 MHz
Modes of Operation: LSB, USB, ISB, AM, CW, and FSK
Sensitivity: 1 uV for 10 dB (S + N / N) in SSB mode, 2 uV in CW and FSK modes, and 4 uV in AM mode
Receiver IF: First IF 20 or 30 MHz, second IF 2.85 MHz, third IF 500 KHz
IF Rejection: -75 dB
Image rejection: -80 dB
Bandwidth: SSB, 3.2 KHz, AM and CW, 7 KHz
Antenna: 50 ohm impedance
Power Consumption: 55 watts
Power Requirements: 115 VAC 48-450 Hz
Audio output: 60 mV (minimum) into 600 ohm balanced, two local headsets connections
The equipment operates in the 2 to 30 MHz band with 100 Hz channel spacing, which gives a choice of 280 000 frequencies. Selection is by decade knobs which control a micro-miniature synthesizer locked to a temperature compensated reference oscillator, giving a high order of stability under all environmental conditions.
The C-41 Transmitter is a wide band VHF FM
The battery pack measures 210mm long * 25mm in diameter, NSN: 6140-99-126-4421. The battery pack is supplied in used condition.